Imágenes del producto
Sorry, this item is temporarily out of stock.
Tarjeta de expansión USB de múltiples protocolos para RasPi 61g
New
Would you like us to let you know when it's back?
Descripción y detalles
Resumen
- COMPATIBILITY: The expansion board is designed based on the for RasPi for 40PIN GPIO interface, which can be applied to for RasPi series motherboards, etc. to achieve seamless integration between multiple platforms.
- MULTI PROTOCOL SUPPORT: Support for LWM2M, COAP, MQTT, TCP, UDP, HTTP, HTTPS and other protocols communication, expanding the scope of application to adapt to a variety of different development needs.
- FLEXIBLE CONTROL: The module leads to the UART control interface, and can also be intervened for STM32 and other main control boards, to achieve diversified function development.
- CONVENIENT DEBUGGING: The onboard USB interface is convenient for power supply or software debugging, and the onboard 2 LEDs can be used to check the module's operate status at any time, which can help you easily carry out project development.
- ACCURATE CONTROL: Support serial port baud rate range from 300bps to 921600bps, while the default is 115200bps. Meanwhile, it supports AT command control, which makes the device operate more accurate and convenient.
Descripción de Tarjeta de expansión USB de múltiples protocolos para RasPi 61g
Placa de expansión multiprotócolo con 2 indicadores LED y interfaz USB para RasPi
Tipo de artículo: Placa de expansión
Material: PCB
Peso: Aproximadamente 61 g / 2.2 oz
Banda de red: B1 B3 B5 B8
Tipo de ranura para tarjeta SIM: SIM estándar (no incluida)
Voltaje de suministro: 5V
Nivel lógico: 5V y 3.3V (predeterminado 3.3V)
Funciones:
1. Basado en el diseño de la interfaz GPIO de 40 pines para RasPi, adecuado para placas base de la serie RasPi
2. Compatible con LWM2M, COAP, MQTT, TCP, UDP, HTTP, HTTPS y otros protocolos
3. Interfaz USB integrada, puede usarse para la alimentación o la depuración de software
4. Interfaz de control UART, puede usarse para conectarse a STM32 y otras placas de control principales
5. 2 indicadores LED a bordo, fáciles de comprobar el estado de funcionamiento del módulo
6. Soporta rango de velocidad en baudios seriales: 300bps-921600bps (predeterminado 115200bps)
7. Soporta control por comandos AT (V.25TER, 3GPP TS 27.007 y conjunto de comandos AT)
Detalles
| OPC | PJBP2X6 |
|---|---|
| Códigos | 4601332973794 (EAN) |