Clean & Easy Personal Electrolysis Kit

Clean & Easy Personal Electrolysis Kit Description

Clean & Easy DELUXE Personal Home Electrolysis (also known as Inverness) - a real alternative to salon electrolysis

NOTE: Before purchasing this product, please read the instructions which are displayed in the product gallery. Electrolysis requires patience and preparation. It is also ESSENTIAL to create a SALT solution in order to create a current. THE UNIT WILL NOT WORK IF YOU DO NOT USE IT WITH THE SALT SOLUTION. 

WHEN YOU RECEIVE THIS UNIT YOU CAN TEST THE UNIT IS WORKING BY: INSERTING THE BATTERY AND THEN TOUCHING THE STYLET  PEN TO THE METAL PLATE (SEE VIDEO). TO THEN GET THE UNIT TO WORK ON YOUR SKIN, YOU MUST FOLLOW THE INSTRUCTIONS ON THE LEAFLET AND CREATE A SALT SOLUTION.

Electrolysis is the process of removing superfluous or unwanted hair by passing a very mild electric current through the hair root (or hair follicle) via a Stylet (needle) tip. Home electrolysis units are widely used to tackle unwanted and often embarrassing hair on the face or on the body. The Clean & Easy Electrolysis is a battery operated device with stylet (needle like) tip that is fast, safe and easy to use. Replacement stylets can be purchased here Designed to provide foolproof results at home, eliminating costly trips to the salon. Best of all, the price of this unit is less than the cost of just one salon treatment. Electrolysis is also a good alternative to laser and, unlike laser, is not dependent on skin or hair colour.

Please note: electrolysis is not recommended for use on men's facial hairs due to the hairs being coarse (repeated improper use of electrolysis can lead to scarring). 

Included in your purchase: Clean and Easy Electrolysis unit with spare stylet and tweezer. This unit requires a rectangular 9V battery (not included).

You will also find it useful to use these 2 items: magnifying mirror and a trimmer to use in between session. The Instruction leaflet is in English, French, Spanish and German.

How Does electrolysis work?

The radio frequencies transmitted via the stylet tip weaken the root, so with every use the hair root and shaft are weakened, and eventually stopped from regrowing. How long it will take to weaken the root varies with every individual and according to the strength of the root. With continued use, you could be hair free forever. This unit has an adjustable power dial so you can control the strength of the radio frequencies.

To use this electrolysis machine you have to insert the needle tip into the base of the hair follicle. When in use, the machine will make a beep sound. This requires practice, but you will find yourself perfecting the technique with continued use.

This electrolysis kit uses one standard 9V battery (the battery is NOT included with the product). The battery is inserted in the battery compartment at the base of the unit. Only open the battery compartment with a coin as per the instructions. ..

Features:
Battery Operated (9 volt Battery NOT INCLUDED)
Variable Frequency
Safe, Easy, Portable
Cost Effective
SPARE STYLET included
CE certified with 1 year Manufacturer's warranty

Where Can electrolysis be Used?
The Clean & Easy Electrolysis is great for use on individual stubborn hairs on the face, bikini line or other body areas on women. We do not recommend using this product on men's hairs. Electrolysis works best on a few hairs at a time making it perfect for hairs on the chin, upper lip and bikini line. It must NOT be used on certain sensitive areas like moles, warts, beauty marks, inside ears and nose. Do not use if you are pregnant, taking medication like Retin A,Glycolic Acid, Steroids or are using a pacemaker. Please ask if you have any questions at all! -Read the instructions in full before use. Exercise caution when using it on an intimate / sensitive area. Patch test first and follow the manufacturer's instructions! You can use it on large areas like legs / arms, but those areas will require a lot of patience.

What Do You Need to Make It Work?
The Clean & Easy Electrolysis is battery operated for convenience so it can be used anywhere. You can even use it while watching TV. Unlike other home electrolysis machines, you do not need replacement gels, pads etc. If using it on large areas, you will need time and patience - this device is best for small areas. Read the instructions thoroughly before use.

The Brand?
This is a quality product by a world trusted manufacturer. American International Industries (AII) was founded in 1971 and is now one of the largest privately held manufacturers and distributors in the U.S. of high-quality beauty and self-care products for men and women. They have 30 years experience, over 29 brands, 100s of individual products sold in over 100 countries around the world.

View Health & Safety Information

Useful Tips:
To check if the device is in working order is to turn the dial up from '0' and place the Stylet tip on the silver strip on the unit - the unit should beep at this point to indicate that there is an electrical current.
A salt water solution must be used on the fingers as the moisture is vital to conduct the current. Always remove the plastic protector and connect the battery. Remove the battery when not in use.

Q.Does the stylet have to penetrate the pore or can it rest on the skin's surface (ie if the stylet retracts)

Stylet tip must be inserted along the underside of the hair and into the follicle.

Q. How long should the stylet bleep on contact with the metal plate / skin.
Once the stylet is inserted in the follicle and you feel a slight tingling, hold the stylet firmly in place for approximately 15 seconds

To achieve long term hair reduction, we recommend this product is used in conjunction with Kalo hair inhibitor. Kalo gradually reduces hair growth - perfect for unwanted face and body hairs.

The device beeps when touching the needle on the metal place but it doesn't beep when it comes into contact with skin.

If the machine is working properly it should beep when the current is running through it and into your skin (little zapping sensations). This is not a professional grade electrolysis machine. It's good for areas of the face or small areas of fine hair on the body (say, the knuckles etc.). If  using it on legs or underarms or bikini, It is possible to have burnt out the electrical wiring. At this point, if it's still under warranty, it can be replaced. These devices have little fiddly parts that may need replacing. The only other way to fix it is to take it to an electronics repair shop and see what they can do.

My product randomly keeps making buzzing noises 

This is because of the current running through the system which means the product is working. 

Difficulty inserting the stylet in the electrolysis pen.

There is some flush at the outlet of the stylet tip, which causes the needle to not come out. Using some tools, such as small drill, to clear the flush can help to solve the problem. 

After how many hairs should I replace the needle?

You don't need to replace the tip after so many hairs treated.  The extra tip in the package is if the first one somehow breaks, is lost, or is for a second person to use. Information regarding the stylet tip from the instructional booklet:  “Each person using the Deluxe Home Electrolysis System must change the stylet tip before use. More than one person should NEVER share the same stylet tip. Before each use, disinfect your personal stylet tip: place in a clean container, cover with isopropyl alcohol, and soak for a few minutes. Discard alcohol after disinfecting.”

And the process is that I should use it on a hair once on the strongest setting and it's gone forever

The user manual on the how to use states:  “Electrolysis works by introducing a very mild electrical current into the moist base of the hair follicle which stops the blood supply to the root. The hair root is then neutralized by a chemical action which prevents it from regrowing.”  “Once treatment is completed, remove the hair with tweezers (Fig. 9). Should you experience any resistance, the root has not been destroyed. Repeat treatment after 48 hours. Electrolysis has been successful when hair can be removed with tweezers without resistance. Treatment time may vary between individuals and depends on the area being treated.”

When I opened the packet one of the two stylets was detached from the rest of the body

There have been no reported issues with the stylet tip. It is possible that the stylet has moved out of place during transit

Using salt solution and metal finger plate has also discoloured. Not sure if that's normal

This should be normal. 

I've insert the stylet but it does not beep.

One Touch and C+E have the same circuit. It appears somewhere open circuit causing no beep and not working.

This item has intermittent fault with dial meaning power is on full all the time

When assembling, the post and the center hole of the potentiometer were not exactly aligned. When the dial pressed to the post, the post might be bent and caused it unable to rotate. This year production changed the positioning of center hole and this problem should be no longer existed.

Neither of them were secure in their 2-peice holder and would stick in my hair follicle and I had to pull the machine off and then tweeze the stylet tip out of the follicle.

Stylets and sleeve are probably not pressed tight

Stylets detached from the rest of the body. It appears that the fine/thin stylet is no longer attached to the base. Is it possible to reattach it?

If something is loosen, it should be able to re-attach.

Using the electrolysis on myself and it beeps when using. However when using on someone else, it doesn't beep and they don't feel a current. 

You should touch the contact plate for a closed loop.

Could the needle snap? I'm so frightened it might snap in my skin because it's so thin and bendy? 

We only have this diameter.  The needle will not break.

Unit on zero makes buzzing noise

The dial is probably not pressed to correct rotational angle of the potentiometer.  The dial mark does not represent the real reading.