Share

Mazda RX8 RX-8 03-10 1.3 2.6 rear drilled and grooved brake discs kinetix 302mm

Out Of Stock

Sorry, This Item Is Out Of Stock

Get A Back In Stock Notification

Enter your email address below and we'll notify you as soon as it's back in stock.

Add To Basket
Description & Details

Mazda RX8 RX-8 03-10 1.3 2.6 rear drilled and grooved brake discs kinetix 302mm Description

Mazda RX8 RX-8 03-10 1.3 2.6 rear drilled and grooved brake discs kinetix 302mm Product Description

Mazda RX8 RX-8 03-10 1.3 2.6 rear drilled and grooved brake discs kinetix 302mm


** This Brake Package has been exclusively designed for the RX-8 models, The RX-8 models are RWD (rear wheel drive) hence a majority of the braking is done by the rear axle. To keep brake temperature's low we have the rear brakes drilled and grooved. Regards to the front brake discs because they have a bigger surface area with a diameter of 323mm, we have them designed in a dimpled and grooved setup **

Kinetix brake discs Setup

Axle: Rear brake set up

Rear Disc Part no: TX053
Rear Disc Diameter: 302mm
Rear Disc Thickness: 18mm
Rear Disc Type: Painted Silver
Rear Disc Style: Drilled and Grooved

Dimpled & Grooved: The key benefits of the dimpled and grooved discs are that brake fade is significantly reduced. the science behind this is the dimples and the grooves deglaze the pad and vents gasses that build up between disc and pad during braking. The additional slots dissipate heat more effectively, thus greatly reducing the risk of deformation, vibration of the disc at extreme operating temperatures.

Drilled & Grooved: The key benefits of the drilled discs are the drills dissipates heat more effectively and breaks down surface gases when braking at high speeds. The holes are laser drilled through the discs which reduces brake mass. The drilled discs also keep the brake temperatures rapidly low which helps keep the pad surface from reaching very high temperatures from the hot surface gasses.


Silver Coating: All Kinetix sports discs are Painted Silver to prevent the discs from corrosion in areas not swept by the brake pad. Optimum brake performance is realised after the zinc coating has been removed from the pad track area, which can take up to 100 miles. It is normal that a small amount of noise is exhibited from Kinetix slotted rotors when they are first applied. This noise gradually diminishes and at around 1,000 miles of road use the noise will be minimal. By nature of the way this product works, Kinetix sport slotted discs will always make some noise and this is not cause for concern, it is not a safety issue and is not recovered by warranty.


CNC Machined: For consistently high standards and identical specification, this disc is manufactured using the latest CNC technology. Electronically Balanced: This disc is electronically balanced and where necessary adjusted to eliminate brake judder. Precision Finished: This disc's braking face is precision engineered to help bed in new discs and pads and eliminate pedal bounce. Original Specification: All brake discs are manufactured to original equipment specification and comply to.


Must Read Before You Buy!

EBAY COMPATIBILTY IS NOT 100% ACCURATE. BEFORE PURCHASING WE RECOMMEND CONTACTING US WITH YOUR REG NUMBER SO WE CAN CHECK FITMENT.THIS WILL AVOID ANY DISAPPOINTMENT OF RECIEVING INCORRECT PARTS.

Details

OPC PWZDRQ
Browse All Car Parts Deals

OnBuy Deals Recommended For You

Sign in to view all of your delivery addresses

OR

Enter your delivery address

Save your items for later!

Simply enter your email address below and we'll send you a copy of your basket to your inbox.

No thanks