11.0 Development Module ESP32 KEY Built-in USB Flash Drive for System Firmware Gaming Accessory

11.0 Development Module ESP32 KEY Built-in USB Flash Drive for System Firmware Gaming Accessory Description

for 11.0 consoles with systems between 9.03 and 11. This device comes with USB flashes function, which can be accessed on a computer with 1GB USB flashes (allowing for self updating of Goldhen files). Colour:As Shown Material:PCB+Metal for this module to run successfully after normal is about 2-3 minutes. If situation where the device shuts down at the same time after unsuccessful please the device and host. After it automatically run. Color device Operations light:Redness: The device is running incorrectly. Please check if each interfaces properly White: RunningGreen: Normal and Operations (it take several ten from to running the injections program)Blue: Running injections program. Usage:For the first time, open the networking on the 11.0 set the Internet connection use the LAN connection cable customize PPPOE fill in the for both the user name and password (note that filling in errors to failure) two be automatic not be used. the Setups (no Setups required after just wait for the device to run). the randomly provided USB data cable (1), USB charging cable (2), and Ethernet cable (3) in sequences, and the device automatically turn on and run. After completing the injections, the Goldhen in upper left corner, indicating the completion of the run. The device automatically shut down. No furthers are required for subsequent use, it automatically run after the power is turned on and the cable. Package Contents: 1 * 11.0 Development Module Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.