(Aluminium) Rustoleum Heat Resistant, up to 750°c - 750ML

Heat Resistant Coating

• Ideal for small maintenance jobs and repairs
• Provides protection for continuous temperatures up to 650°C
• Provides protection for peak temperatures up to 750°C
• Suitable for application indoors or sheltered outdoor environments
• Apply to new, bright or shot-blasted steel
• Apply to pre-treated coated surfaces e.g. barbecues, boiler fittings, hot air cannons, exhausts etc.
• Colour: Aluminium/Black
• Pack size: 750ml

Hard Hat® 1015 and 1078 are Heat Resistant Coatings based on a silicone modified alkyd resin. Hard Hat can be applied on new, bright or shot-blasted steel or well pre-treated coated surfaces such as barbecues, boiler fittings, hot air cannons, exhausts,etc. Hard Hat is intended for small maintenance jobs and repairs. Provides protection up to a dry heat of 750°C (short term peak load) for applications indoors or in a sheltered outdoor environment.

Note: Rust-oleum Heat resistant coating 1015 and 1078 are self-priming and should not be applied on primers or coatings which are not heat resistant.

Gloss Level: Matt

Corrosion Class: N/A

Heat Resistance: Standard 600°C (dry heat); Short term peak 750°C (dry heat)

Recommended Wet Film Thickness: 85 µm

Recommended Dry Film Thickness: 30-40 µm

Theoretical Consumption: 10-12 m² per litre at 35-40 µm dry

Shelf Life: 2 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.

Dry to Touch: 2 hours

Dry to Handle: 8 hours

Dry to Recoat: 24 hours

Fully Cured: Allow the product to dry for 3 hours at room temperature and then heat to 150°C in stages of max. 50°C/hour. Allow to cool for 24 hours. The product is now fully cured.

Please refer to the product Data Sheet for more technical information.

Rust-oleum Heat resistant coating 1015 and 1078 are self-priming and should not be applied on primers or coatings which are not heat resistant.

To ensure homogeneity, coating materials should be thoroughly stirred prior to use.

Apply via brush or roller, no thinning required. Use shorthaired polyamide (perlon 8 - 12 mm) rollers.

Only apply if the air and surface temperatures are between 5 and 35°C and the relative humidity is less than 85%. The temperature of the coated surface must be at least 3°C above the dewpoint.

Use Rust-Oleum Thinner 7301 to clean equipment and spills.

Refer to the product packaging and the Data and Safety Sheets for further details.

• VOC Level: 1015: 458 g/l max / 1078: 416 g/l max
• VOC Readymix: 1015: 458 g/l max / 1078: 416 g/l max
• VOC Category: A/i
• VOC Limit: 500 g/l