Touch Screen Digital Oscilloscope with Signal Generator

Touch Screen Digital Oscilloscope with Signal Generator Description

With comprehensive functions and high practicality, targeting people in the maintenance and industries.
This device has two major functions: oscilloscope and signal generator. The oscilloscope adopts FPGA+MCU+ADC hardware architecture.
It has a sampling rate of 250MS/s, an analog bandwidth of 50Mhz, a built-in high-voltage protection module, and supports a maximum voltage measurement of 400V;supports waveform screenshots. Save and view to facilitate secondary analysis.
Inside Set up a DDS function signal generator, which can output 12 kinds of function signals. The maximum output of the signal generator is 2MHz, with a step of 1Hz; output frequency, amplitude, and duty cycle Adjustable.
It uses a 3.98-inch touch display and a built-in 3000mAh rechargeable lithium battery with a standby time of up to 7 hours.

name:Touch Screen Digital Oscilloscope
Real Time Sampling Rate:250MHzz
Digital Channels:2
Oscilloscope:
Channel:Dual channel.
Analog bandwidth:50MHz.
Real-time sample rate:250MSa/s.
Storage depth:Up to 128kByte.
Input mpedance:1MΩ.
Time base range:10ns/ - 20s/.
Vertical sensitivity:10mv/ - 20v/.
Time base accuracy:20ppm.
Maximum measured voltage:400V.
Probe:1x/10x.
Bandwidth limitSupport 20MHz limit.
Trigger mode:AUTO/Normal/Single.
Trigger type:Rising edge, Falling edge.
Waveform display mode:XY/YT/Scroll.
Coupling method:.
Measured data:Period, frequency, -to- value, maximum value, minimum value, Average value, effective value, amplitude, duty cycle, pulse width.
Math alculations:1+2,1-2,1*2,1/2,-1,-2,|1|,|2|,.
Save waveform screenshot:Yes.
Export waveform images from computer:Yes.
Colour:As Shown
Material:ABS

Package Contents:
1 * Touch Screen Digital Oscilloscope kit

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.