MQ138 Formaldehyde Gas Detection Sensor Formaldehyde Sensor Module Gas Sensor High Sensitivity 4.5-5.5V 10A TTL
În stoc
De ce îți va plăcea să cumperi de la OnBuy:
- Câștigi Cashback la fiecare achiziție – folosește-l la următoarea comandă
- Livrare gratuită – la milioane de produse de pe site
- Clienții ne iubesc – 126,000 de recenzii cu evaluare “Excelent”
Prețurile articolelor vândute de OnBuy includ TVA.
Opțiuni de plată în rate fără dobândă disponibile
Vezi descrierea completă și detaliile produsului
Livrare: Standard (Gratuit) | lun 22 - vin 26 iun.
Vândut de: Papishop
Returnări: 30 zile
Protecție la plată pentru 180 de zile
Rezumat
- 1. High-quality double-panel design with power indication and TTL signal output indication;
- 2. DO switch signal (TTL) output and AO analog signal output;
- 3. TTL output high and low levels. (Can be directly connected to a single-chip microcomputer or relay module)
- 4. Analog output voltage changes with concentration.
- 5. There is a screw hole for easy positioning;
Descriere MQ138 Formaldehyde Gas Detection Sensor Formaldehyde Sensor Module Gas Sensor High Sensitivity 4.5-5.5V 10A TTL
1. High-quality double-panel design with power indication and TTL signal output indication;
2. DO signal (TTL) output and AO analog signal output;
3. TTL output high and low levels. (Can be directly connected to a single-chip microcomputer or relay module)
4. Analog output voltage changes with concentration.
5. There is a screw hole for easy positioning;
With long service life and reliable stability
Fast response recovery characteristics
Electrical performance:
Input voltage: DC5V Power consumption (current): 150mA
DO output: TTL digital quantity 0 and 1 (0.1 and 5V)
AO output: analog level signal
Special reminder: After the sensor is powered , it needs to be preheated for about 20S before the measured data is stable. It is normal for the sensor to heat because there is a heating wire inside. If it is hot, it is not normal.
Wiring method:
1. VCC: connected to the positive pole of the power supply (5V)
2. GND: connected to the negative pole of the power supply
3. DO: TTL signal output
4. AO: analog signal output
5. There are fixing bolt holes for easy installation
Color: As Shown
Material: PCB
Package Contents:
1 x MQ138 Formaldehyde Sensor Module
Detalii
| OPC | PV87SGJ |
|---|---|
| Brand | Typecat |
| Coduri | 6031443140354 (EAN) |
Date despre produs
| Height | 7cm |
|---|---|
| Width | 10cm |
| Length | 10cm |
| Weight | 0.15kg |
| Colour | As Shown |
| Material | PCB |
Compară vânzătorii pentru MQ138 Formaldehyde Gas Detection Sensor Formaldehyde Sensor Module Gas Sensor High Sensitivity 4.5-5.5V 10A TTL
- Nou de la 186,25 RON
| Vânzător | Note | Garanție | Retururi | Preț | Livrare | Total | Cantitate |
|---|---|---|---|---|---|---|---|
|
Expediat din:
|
(405 recenzii) | - |
30 zile
Retur gratuit Nu
|
186,25 RON
|
+Free Delivery
Livrare estimată:
22-26 iun.
|
186,25 RON
|
Câștigați în timp ce cumpărați cu Cashback instant la orice produs.
Fără condiții ascunse, fără costuri
- Plătit în contul dumneavoastră OnBuy
- Folosiți-i pentru următoarea achiziție
- Economisiți-l sau retrageți-l
Deveniți un Cashback VIP
O singură achiziție deblochează oferte și rate mai avantajoase