4-Port to Adapter 2.5 Inch /TF to Electronic Hard Disk Self-Made SSD Solid State Drive Stable Transmit

4-Port to Adapter 2.5 Inch /TF to Electronic Hard Disk Self-Made SSD Solid State Drive Stable Transmit Beschreibung

1. FC1307A, JM20330 solution
2. Supports 0 of four TF cards, that is, the capacity of four TF cards is added together. It is recommended to use the same model and performance TF. You can also use a single card in the first TF position, or use dual cards in the first and second positions.
3. Compatible with DOS, WINCE, WIN98/XP/VISTA/NT, WIN7/8/10 and LINUX operating systems.
4. Equivalent industrial use flexibly plug and unplug SSD, use TF as a mobile hard disk to achieve flexible data storage.
5. After the hard disk is transferred, it can be used as a system boot disk or a data disk.

TF supports high-speed cards.
TF has been tested so far to support a maximum of 128GBx4=512GB.
Compatible with GEN1 and GEN2, Dual Data Transfer Rates: Compatible with Gen1 (1.5Gbps) and Gen2 (3.0Gbps), supports high-speed TF/ Memory Card to Adapter cards, achieving a total capacity of 512GB in 0 configuration. Plug-and- with full system compatibility.
Support opening. Make a slot the user's device chassis facing the TF card slot opening to achieve TF mobile storage.
Work with BIOS and operating system to support and TF hot-swap, plug and , and can be used without any driver. When hot-swapping the TF card, pay attention to the coordination of BIOS, operating system and application. Do not hot-swap when reading and writing data to avoid data loss. In general, cold-swap is recommended to achieve mobile storage of data.
Size: Compatible with 2.5-inch and 3.5-inch hard disk interfaces. Standard 2.5-inch hard disk plastic shell. You can also specify to purchase a bare board. It can be used desktops and notebooks.
Color: Black
Material: PCB

Package Contents:
1 x 4-Port TF to Adapter Card
1 x SSD Case
1 x screwdriver
1 pack x scr