DC LC Tiefpassfilter 20A elektromagnetisch

DC LC Tiefpassfilter 20A elektromagnetisch Beschreibung

DC LC Low-Pass Filter 20A Electromagnetic Description
Introduction to the PT-0008 DC filter circuit: The circuit consists of a three-stage filter. The first stage is a single-stage LC filter, the second stage is common-mode filtering, and the third stage is a two-stage LC filter.
An LC filter is generally referred to as a passive filter. It is a conventional DC harmonic compensation device consisting of inductors and capacitors. It can filter harmonics in the power supply once or several times. DC power supply cleaning and common-mode filtering can suppress the problem of fast transient group pulse disturbances with a repetition frequency of several kilohertz at some user locations. Input: DC. Output: DC. Voltage: 50 V (higher voltage can be achieved by replacing the electrolytic capacitor for improvement). Current: 20 A. Main component specifications: Circuit board: Double-sided FR4 fiberglass board. Electrolytic capacitor: 50 V, 470 µF, 13 mm diameter, quantity 4. Film capacitor: 100 NF, 3. Magnetic ring inductor: Quantity 2 pieces (20 A high current, using FeSiAl),
DC actuating inductor; consumption 1 piece, (20 A high current, choose flat copper strip inductor)
Socket: 7.62 socket 2-pin 2 pieces
This module is suitable for avoiding the use of DC power supplies with electromagnetic interference. It can be used for filtering after switching the power supply output, in cars, motorcycles, and DC systems with strong electromagnetic interference. Factory batches vary, and some appearances may differ, which does not affect the product. Color: Photo color. Material: ABS. Package contents: 1 x Low-pass filter. Only the above package contents, other products are not included. Note: Light reflections and different displays may cause the color of the item in the picture to be slightly different from the real thing. The allowable measurement error is +/- 1-3 cm. [OnBuy.com]