For Bypass Emergency Start Device Plug and Start IMMO OFF Diagnostic Tools Auto Repair OBD2 By Pass

For Bypass Emergency Start Device Plug and Start IMMO OFF Diagnostic Tools Auto Repair OBD2 By Pass Beschreibung

For By-pass - Emergency Start Device Description: For By-pass - Emergency Start Device Emulator will only work vehicles equipped with metal key. It won't work with a Remote key
The fastest procedure - car is ready to start right after plugging in Intelligent recognition of the ECU and car Original CarLabImmo tool - you can trust it won't let you down
For By-pass - Emergency Start Device OverviewTo use Bypass you just need to connect it to the OBD2 socket in the car. The tool bypasses the original immobiliser signal and allows you to start the car right after plugging it in.
For By-pass - Emergency Start Device Usage Requirements:Car has to be equipped with mechanical key.Car has to be equipped with original parts. The device will work only in case of a lost key.If the car is equipped with an SGW Module (some models starting from 2017 year), you need to use SGW Adapter in order to bypass Security Gateway Module
Insert the device into OBD plug(In some models produced from 2017 year, you have to use SGW Adapter), the LED will start blinking fast.Turn the ignition - the LED will start blinking slowly.Start the car.If the LED keeps blinking fast after turning the ignition , take the key out, wait 30 seconds and turn the ignition again.
Bypass Emergency Start
for Multi-Jet 500 Etc
Note:
Installation guide not included, we strongly recommend you seek professional installation.
Please check as much as possible to make sure the item is what you need.
Color: As Shown
Material: plastic

Package Contents:
1* Car Bypass Immobilizer