Mosiee ZK-PP2K PWM dimming speed controller

Mosiee ZK-PP2K PWM dimming speed controller Beschreibung

Features: *Can directly drive LEDs, motors, solenoids and other loads. *Two modes can be selected: PWM mode: frequency (continuous), duty cycle. Attention: The number of pulses cannot be set in this mode, the module will always send pulses. PULSE mode: positive pulse width time, negative pulse width time, power-on delay start time, and switching times are adjustable.*With start and stop button to control the output and stop of signals. *Wide voltage input3.3-30V, with5.08mm wiring terminal. *Adjust LED brightness, frequency and duty cycle. *Adjust motor speed, frequency and duty cycle. *Drive solenoid valve to close and release. Automatic loop, delay output, number of loops (or infinite loop) can be set. *Turn on and off control equipment, do switch fatigue test, voltage drop and other tests to verify the reliability of customer equipment. *Delay start load, delay time can be set. Always on or intermittent work after the delay. Specifications: *Working voltage: 3.3~30V (Reverse connection is not allowed) *Frequency range: 1Hz~150KHz, accuracy about2%. Motor speed is generally selected20KHZ. *Duty cycle range: 0-100%, 1% stepping *Number of pulses: 1-9999, or infinite (---- displayed stands for infinity) *Delay output time: 0.000s-9999s. The minimum can be set1ms *Positive and negative pulse width length: 0.000s-9999s. The minimum can be set1ms *Signal loading capacity: less than8A (MOS switch tube) *Output amplitude: amplitude is equal to supply voltage (OUT+ is directly connected to V+ inside the module) Package Included: 1PCS PWM Pulse Generator Driver Note: 1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 2. Please allow slight manual measurement deviation for the data.