2 in 1 IDE to / to IDE Adapter Converter 3.5" 40pin for DVD CD HDD Bidirectional Transfer PC Data Cable

2 in 1 IDE to / to IDE Adapter Converter 3.5" 40pin for DVD CD HDD Bidirectional Transfer PC Data Cable Beschreibung

This conversion card is designed to connect hard disks to the motherboard IDE interface, ensuring compatibility with older systems.
The IDE interface of the conversion card is slightly smaller than the hard- interface, requiring careful alignment during installation.
The hard disk must be connected to both the data cable and power cord, while the conversion card also requires a power connection.
BIOS settings should be checked to ensure automatic identification of the hard disk device the IDE interface.
If the system only recognizes hard drives less than 136GB, it may indicate that the motherboard does not support LBA48 IDE addressing, necessitating a BIOS update or motherboard replacement.
If the installation is still not recognized hard disk, you should check in detail the above installation steps and connections, and note the following: 1. This conversion card is inserted in the motherboard IDE interface, the motherboard IDE is not the with the card IDE prominent position the; 2. In addition to the hard disk must be connected to the data cable and the power cord, the conversion card must also be connected to the power (you can use this card delivery power adapter cable or direct use of the floppy drive power cord); 3. Check the BIOS is set to automatically identify the hard disk device IDE interface, if not set to enter the BIOS settings; 4. If you can only identify less than 136GB hard drive, but does not support larger hard drive, indicating that the motherboard does not support LBA48 IDE addressing, please contact the motherboard manufacturers to refresh the latest BIOS after the attempt, or replace the newer motherboard Solve, this.
Color: Red
Material: PCB

Package Contents:
1 set of /IDE data adapter cable