Sorry, this item is temporarily out of stock.
5000W Battery Spot , Adjustable Spot Machine for 18650 Lithium Batteries, Welding Nickel Sheets US Plug
Ähnliche Produkte, die dir gefallen könnten
Would you like us to let you know when it's back?
Zusammenfassung
- 1.With LED digital display design, you can directly see the battery power and charge the machine in time. (Please fully charge before first use, and recharge when the voltage is lower than 7.3V).
- 2.The spot welder has good performance and a long service life, with a safe plastic shell, two spot welding pens with good conductivity and low contact resistance. The tip is replaceable.
- 3.The 5000w spot welder has adjustable output current, spot welding 0.1-0.15mm nickel-plated steel sheets and 0.1mm pure nickel sheets, which is very suitable for welding 18650 battery pack spot welding iron sheets, stainless steel sheets.
- 4.Just press the nickel sheet with two welding pens and step on the foot switch, wait about 0.5 seconds to output spot welding, and then release the foot switch.
- 5.Light weight, portable design, the body is 6.5x3.86x2.36 inches, you can use this machine in different occasions.
5000W Battery Spot , Adjustable Spot Machine for 18650 Lithium Batteries, Welding Nickel Sheets US Plug Beschreibung
1.With LED digital display design, you can directly see the battery power and charge the machine in . (Please fully charge before first use, and recharge when the voltage is lower than 7.3V).
2.The spot has good performance and a long service life, with a safe plastic shell, two spot welding pens with good conductivity and low contact resistance. The tip is replaceable.
3.The 5000w spot has adjustable output current, spot welding 0.1-0.15mm nickel-plated steel sheets and 0.1mm pure nickel sheets, which is very suitable for welding 18650 battery pack spot welding iron sheets, stainless steel sheets.
4.Just press the nickel sheet with two welding pens and step the foot , wait about 0.5 seconds to output spot welding, and then release the foot .
5.Light weight, portable design, the body is 6.5x3.86x2.36 inches, you can use this machine in different occasions.
Name: 5000W high-power spot
Working temperature: 10C-65C
Power supply: AC100-240V 50/60Hz
Display: 0.28-inch digital tube
Charging voltage: 8.4V/500ma
Battery capacity: 4000mAh
Output power: 5000W
Welding thickness: 0.1-0.25mm
Note:
1. Avoid using while charging, otherwise it is easy to damage the battery.
2. When the temperature of the soldering pen is too high, please use it after cooling.
3. Please charge it in when the voltage is lower than 7.3V.
4. Please use it in an ambient temperature between 10 degrees and 65 degrees. No water is allowed. Please understand the operating instructions before using this machine.
Precautions for use:
1. Place the nickel sheet the lithium battery, use the 18650 battery clamp to move and align the nickel sheet, and press the foot pedal to complete the welding.
2. When welding, be sure to press the nickel sheet and the battery with two needles.
3. The welding pen tips cannot touch each other.
Voltage: AC100-240V
Details
| OPC | PXKQK69 |
|---|---|
| Codes | 6031342733503 (EAN) |
| Produkt- und Sicherheitsinformationen |
Produktdaten
| Height | 13cm |
|---|---|
| Width | 11cm |
| Length | 20cm |
| Weight | 0.881kg |
| Colour | As Shown |
| Material | Plastic |
Would you like us to let you know when it's back?
5000W Battery Spot , Adjustable Spot Machine for 18650 Lithium Batteries, Welding Nickel Sheets US Plug