INPA K+DCAN OBD2 USB Interface Cable with Switch for EDIABAS & NCS Expert

INPA K+DCAN OBD2 USB Interface Cable with Switch for EDIABAS & NCS Expert Beschreibung

INPA K+DCAN OBD2 USB Interface Cable with Switch for EDIABAS & NCS Expert
Latest Versions and Support Systems:
Applicable to WINDOWS XP, or WIN7 32-bit, not other systems
Feature:
*High quality cable with green PCB board with switch on the cable.
*Easy to follow the installation instructions that come with the cable. Basically a "one-click" install, no setup required
Puzzled!
*While this cable will work with the car (using the ISTA procedure provided above), the procedure
Included below is work from 1996-2009.
*Connect to USB
*(1.5 m cable, creates virtual COM port)
*Support double K line
*Support high-speed CAN (500 kbit/s)
*Supports low speed CAN PT (100 kbit/s)
Detect battery voltage through control line
Detect contact via control wire
*For USB port.
Program:
-INPA 5.0.6
-EDIABAS 7.3.0
NCS Expert and NCS Dummy
-EDIABAS Tools 32
-WinKFP 5.3.1
-BMW Coding Tool
-USB driver for cable
Function:
Easily switch between old and new models
--Read and erase error codes
--adaptation
-encoding
--Double K line support
--High-speed D-CAN and PT-CAN support
--Low-speed PT-CAN support
--Detect battery voltage through control line
--Detect ignition voltage through control line
--Flash data upload and download
--input/output control
--CAN BUS mode simulation
--FTDI FT232RL Chipset
Supported Models:
K-CAN models:
BMW 1 Series E87
BMW 3 Series E46 E83 E90
BMW 5 Series E39 E60 E61
BMW 6 Series E63 E64
BMW 7 Series E38 E65 E66
BMW X Series E53
BMW Z series E85 E52
D-CAN Models:
After E60, E61 32007
Post E83 9/2006
After E81, E87 32007
After E90, E91, E92, E93 32007
E53
E70 (New X5)
R56 (New Mini)
Package Included:
1 x INPA with Edibas K+DCAN USB port
1 x CD software driver