Risegun Automatic Boost Buck Converter DC 5V-32V to 1V-30V 10A Voltage Regulator, Automatic Step Up Down Charging Module LTC3780

Risegun Automatic Boost Buck Converter DC 5V-32V to 1V-30V 10A Voltage Regulator, Automatic Step Up Down Charging Module LTC3780 Beschreibung

Features High-efficiency regulated power supply module: Ensures stable output voltage even when input voltage varies, providing reliable power for various applications. Perfect defend functions for solar energy charging: Safeguards the module and equipment, making it ideal for solar energy systems. 1.6 thickened gold plating process: Enhanced durability and conductivity, ensuring long-lasting performance. Replaceable for input defend: Safeguards the power supply and connected devices, enhancing safety and longevity. Low resistance, high-frequency electrolytic capacitors: Minimizes ripple effect, promoting stable and efficient power delivery. Specification: Item Type: Automatic Step Up Down Voltage Regulator Input Voltage: DC5-32V (Recommended more than 10V) Output Voltage: DC1V-30V continuously adjustable Output Current: 10A (MAX), long-term 7A Output Power: Long-term 80W, peak 130W, please strengthen the heat dissipation when more than 80W Output Ripple: 50mV (Measured at 12V to 12V, 5A) Short Circuit defend: Yes Input Reverse Polarity defend: None, if necessary, connect Schottky diodes at the input end Output Anti-Backflow: None, if used for battery charging or inductive load, please connect Schottky diode at the output end Size: 77.6x46.5x15mm / 3.06x1.83x0.59in Adjustment Method: 1. Battery undervoltage defend adjustment method: (Set the 10V undervoltage defend and shutdown output with 12V lead-acid battery as an example) Connect the input to regulated power supply and adjust to 10V, adjust the undervoltage defend potentiometer (clockwise increase, counterclockwise decrease), until the fault indicator (red light) is on, the setting is OK; Then when the battery is discharged to 10V, The power supply is automatically cut off to protect the battery from damage. Note: If it is not battery powered,do not need to set. 2. Output voltage adjustment method: Connect the input to power supply (voltage is higher than undervoltage defend value), red light is off, blue light is on, connect output to a multimeter, adjust output voltage potentiometer to the required output voltage (CW increase, CCW decrease). Note: Under normal condition, the red light is not on, the blue light is on, otherwise there is a faulty, please remove faulty them re-power. 3. Output current adjustment method: (Charge for 12V lead-acid battery with 12V input, charging current 5A as an example) Connect the input to 12V power supply, parallel the output to the multimeter, adjust constant cu Package List 1 x Voltage Regulator