Variable Frequency Drive Converter Single Phase 1 in 3 Out Controller AC 220V for Motor CNC

Variable Frequency Drive Converter Single Phase 1 in 3 Out Controller AC 220V for Motor CNC Beschreibung

Variable Frequency Drive Converter Single Phase 1 in 3 Out Controller AC 220V for Motor CNC
Feature:
1. FREQUENCY INVERTER: This VFD allows for driving with large torsion, high accuracy, quick response as well as wide adjustable speed range.
2. UNIQUE PWM CONTROL: Optimized PWM control and electromagnetic compatibility ensure low noise and low electromagnetic interference.
3. STABLE WORKING: Has good anti trip performance and the ability to adapt to coarse power, temperature, humidity and dust interference.
4. PRACTICAL USING: Can be widely applied on motor, mixer, ball mill, water pump, cranes, conveyor, air compressor, fan, CNC machine tool, etc.
5. CONVENIENT WIRING: After removing the screw, connect it directly to the wire, the simple wiring also makes the installation more convenient.
Specification:
Item Type: Variable Frequency Drive
Parameter
Power (KW)
Input Voltage (V)
Output Voltage (V)
Frequency Range(Hz)
AT1-1500S
1.5
1 Phase 220
3 Phases 0-220
0-400
AT1-2200S
2.2
1 Phase 220
3 Phases 0-220
0-400
Shell Material: ABS Plastic
Power Phase Number: 1 phase.
Filter: Built in filter.
DC Power Supply Nature: Voltage type.
Control Method: V/F closed loop.
Output Voltage Adjustment Method: PWM control.
Product Sizes(including knob): (width x height x thickness) Approx. 130 x 195 x 109mm / 5.1 x 7.7 x 4.3in (manual measurement has an error within 3%).
Applicable Equipment: For motor, mixer, ball mill, water pump, cranes, conveyor, air compressor, fan, CNC machine tool, etc..
Package List:
1 x Variable Frequency Drive1 x User Manual
Note:
Please read the user manual carefully before wiring and use. Note that the input voltage of the inverter is 1 phase 220VAC, and the load power should be lower than that of the inverter. Overload use is strictly prohibited.