5A LTO Active Balancer 6S with Voltage Dispaly

Description de 5A LTO Active Balancer 6S with Voltage Dispaly

Working voltage:1.8V-4.5V Working principle, the capacitor fit transfers the charge mover, the equalization board is connected to the battery, and the equalization is started. The new ultra-low internal resistance MOS, 2OZ copper thickness PCB. Equilibrium current 0-5.5A, the more balanced the battery, the smaller the current, with manual sleep switch, sleep current mode is less than 0.1mA, the balance voltage accuracy is within 5mv! The quiescent current is about 12 mA. It is recommended that the battery capacity is 60-300AH. With under-voltage sleep protection, the voltage stop automatically when the voltage is lower than 3.0V, and the standby power consumption is less than 0.1mA. Why need balancer: As the battery battery cycle times increase, the battery capacity decay speed is inconsistent, causing the battery voltage to be seriously out of balance. The battery effect cause the battery to charge. The system detects that the battery has entered the overcharge protection in advance. In fact, only one of the batteries is full, or let The system detects that the battery enters the over-discharge protection state, which is actually caused by over-discharge of one of the lower-voltage batteries. After the device acts, each battery voltage reduces the capacity attenuation caused by the battery effect and prolongs the problem. The battery pack has a service life. The accuracy of a single string is 0.001V, and the total voltage is 0.01V. Specifications:6S LTO Color:Black Material:plastic Package Contents: 1 * active balancer Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.