5X SPH0645 I2S MEMS Microphone Breakout Sensor Board Module SPH0645LM4H Module 1.6-3.6V for Raspberry Pi
En stock
Pourquoi vous allez adorer OnBuy :
- Gagnez du Cashback sur chaque achat – dépensez-le immédiatement sur votre prochaine commande
- Livraison gratuite – sur des millions d'articles sur le site
- Les clients nous adorent – 136,000 avis avec une note « Excellente »
Les prix des articles vendus sur OnBuy incluent la TVA.
Options de paiement sans intérêts disponibles
Voir la description complète et les détails du produit
Livraison : Standard (8,02 €) | lun. 2 - sam. 7 nov.
Retours : 30 jours
Protection des paiements pendant 180 jours
Résumé
- The microphone is a single mono element. You can select whether you want it to be on the Left or Right channel by connecting the Select pin to power or ground. If you need stereo, pick up two microphones!
- You can set them up to be stereo by sharing the Clock, WS and Data lines but having one with Select to ground, and one with Select to high voltage.
- This I2S MEMS microphone is bottom ported, so make sure you have the hole in the bottom facing out towards the sounds you want to read. It's a 1.6-3.6V max device only, so not for use with 5V logic (its really unlikely you'd have a 5V-logic device with I2S anyways).
- Many beginner microcontroller boards don't have I2S, so make sure its a supported interface before you try to wire it up! This microphone is best used with Cortex M-series chips like the for Arduino Zero, for Feather M0, or single-board computers like the for Raspberry Pi.
- Microphone Module
Description de 5X SPH0645 I2S MEMS Microphone Breakout Sensor Board Module SPH0645LM4H Module 1.6-3.6V for Raspberry Pi
The microphone is a single mono element. You can select whether you want it to be the Left or Right channel by connecting the Select pin to power or ground. If you need stereo, pick two microphones!
You can set them to be stereo by sharing the Clock, WS and Data lines but having one with Select to ground, and one with Select to high voltage.
This I2S MEMS microphone is bottom ported, so make sure you have the hole in the bottom facing out towards the sounds you want to read. It's a 1.6-3.6V max device only, so not for use with 5V logic (its really unlikely you'd have a 5V-logic device with I2S anyways).
Many beginner microcontroller boards don't have I2S, so make sure its a supported interface before you try to wire it ! This microphone is best used with Cortex M-series chips like the for Zero, for Feather M0, or single-board computers like the for Raspberry Pi.
Color:
Material: Plastic+Metal
Package Contents:
5 x Microphone Module
Informations
| OPC | PYJXP5J |
|---|---|
| Codes | 4711081986775 (EAN) |
| Informations sur le produit et la sécurité |
Données sur le produit
| Height | 5cm |
|---|---|
| Width | 1cm |
| Length | 1cm |
| Weight | 0.0075kg |
| Colour | Blue |
| Material | Plastic+Metal |
Comparez les vendeurs de 5X SPH0645 I2S MEMS Microphone Breakout Sensor Board Module SPH0645LM4H Module 1.6-3.6V for Raspberry Pi
- Neuf à partir de 70,54 €
| Vendeur | Notes | Garantie | Retours | Prix | Livraison | Total | Quantité |
|---|---|---|---|---|---|---|---|
|
Envoyé depuis :
|
(112 avis) | - |
30 jours
Retours gratuits Non
|
62,52 €
|
+8,02 € Delivery
Date de livraison estimée :
2-7 nov.
|
70,54 €
|
Gagnez en faisant vos achats avec du Cashback instantané sur tout.
Sans frais, sans engagement
- Versé sur votre compte OnBuy
- Utilisez-le pour votre prochain achat
- Économisez-le ou retirez-le
Rejoignez le programme cashback VIP
Un seul achat pour débloquer de meilleures offres et réductions