Electric Drill Impact Handheld Drill Rechargeable Brushless Power Punch Tool AC110?240VUS Plug

Description de Electric Drill Impact Handheld Drill Rechargeable Brushless Power Punch Tool AC110?240VUS Plug

Item Type: Electric Drill
Model: TB089
No-Load Speed: 2000rpm
Power Supply: Rechargeable-lithium battery technology
Battery: Rechargeable lithium battery, 1500mAh
Power Supply Voltage: AC110-240V
Working Voltage: 21V
Use Time: About 150 minutes
Rated Output Power: 200W
Rated Torsion: 38Nm
Electric Drill Structure: Pistol grip type
Speed regulation: Stepless speed regulation
Rotation Direction: Support CW and CCW
Drill Bit Clamping Method: Drill chuck
Handle Structure: Rear straight handle
Application: Screw drilling, unloading nuts, drilling wood
Chuck Diameter: Approx. 12mm / 0.5in
Maximum Drill Diameter: Approx. 10mm / 0.4in
Rated Speed: 1500rpm
Wood Drilling: Approx. 20mm / 0.8in
Aluminum Drilling: Approx. 20mm / 0.8in
Steel Drilling: Approx. 12mm / 0.5in
Accessories: One battery one charging plastic box
1、The electric drill is brushless, free from radio interference during operation, with low noise and glossy operation.
2、The drill bit is made of tungsten steel, which has high hardness, wear resistance and large torsion.
3、The electric drill has high speed and torsion, suitable for wood, metal plastic and all screw drilling tasks.
4、This drill supports CW and CCW directions, which can prevent the drill bit from being pinched during operation, and it is more convenient to ream.
5、The pistol grip provides a comfortable grip and reduces the fatigue of long-term drilling work.1. When operating, the operator should pay attention to whether the accessories are intact, whether the insulated cable is damaged, whether there is aging, etc. After the inspection, plug in the power source before proceeding.
2. During cutting and grinding operations, there should be no people and explosives within one meter around, and do not work in the direction of people to prevent casualties.
3. When the grinding wheel is used up and needs to be replaced, the power supply must be cut off to replace it, in case the switch is pressed accidentally, causing unnecessary personnel accidents.
4. When working with dangerous and flammable materials, more than two fire extinguishers must be equipped to prevent problems. Achieve the principle of safety first and production second.
5. If you use it after a long period of 30 minutes, you should stop resting for more than 20 minutes, and work after it cools down. To prevent the temperature from being too high during long?term use, which is easy to damage and cause industrial accidents.
6. When in use, we must use it in accordance with the use specifications and instructions, and perform regular inspections, maintenance, and ensure that the work is in good condition to reduce the occurrence of accidents.

1 x Electric Drill

1 x Battery Box

1 x Adapter

1 x User Manual