2.2-inch flex sensor for electronic glove accessories for manipulators

2.2-inch flex sensor for electronic glove accessories for manipulators Description

2.2-inch Flex Sensor for Electronic Glove Accessories for Manipulators Description
1. Bending sensor. The degree of bending of the sensor can be translated into a change in the resistance value. The greater the bend, the higher the resistance. This sensor can be used to manufacture an energy glove.
2. Bending direction: The side with the word is the inside when bent. Avoid bending the pin section (the part that does not bend) during use, as this can cause damage.
Product Description:
Model: Flexsensor 2.2 inch
Specifications Straight Resistance: 25 kΩ
Resistance Tolerance: +30% Bending
Resistance Change: 60 kΩ - 110 kΩ
Rated Power: 0.5 Watts Power: 1 Watt
Bending Lifespan: More than 1 million times
Operating Temperature: -35C - +80C
Interface Type: 2-pin metal pins (0.1 pitch)
Torque sensor for electronic gloves. When the metal of the sensor bends outwards, the sensor's resistance changes, and the bend can be detected. Resistance in the unbent state: -9000 ohms Resistance at 90-degree bend: 14000 ohms Resistance at 180-degree bend: 22000 ohms Principle: Current sensor Application: Pressure sensor Type: Vibration sensor Output: Analog sensor Size: 7.5 x 1 x 1 cm Material: ABS Color: Yellow Package contents: 1 x Flex sensor Only the above package contents are included; other products are not included. Note: Light reflections and different displays may cause the color of the sensor to appear slightly different. The item in the picture may be slightly different in color than the actual product. The permissible measurement error is +/- 1-3 cm. [OnBuy.com]