2.4G RF Remote Control Page Turner Clicker

2.4G RF Remote Control Page Turner Clicker Description

Usage steps: (no Bluetooth compatibility and WIFI required)Step 1: To pair, just and hold the activation button on the screen sensor clip for 2 seconds.: Place the screen sensor clip on the screen.Step 3: the page turning key on the remote control.
Note:The sensing point must be clean and dust must be minimized.The sensing point must be close to the screen.When the LED indicator turns red, put it back to the charging dock and charge.

Usage: General
Wireless communication: RF
Wireless communication type: 2.4G RF radio frequency
Transmission distance: 10 meters
Charging interface: Type-C
Working voltage: 3.1-4.2V
Maximum charging current: 200MA
Low voltage prompt: Less than 3.3V
Charging voltage: DC5V?0.25V
Charging compartment battery: 200 mAh
Charging time: 1-2 hours
Dimensions: 114.00x55.00x52.00mm/4.49x2.17x2.05 inches
Weight: 175 grams
Troubleshooting:
1. The screen sensor clip does not work.
Solution: Please check if the green light on the screen sensor clip is on when operating the remote control. If it is on, try to adjust the position of the screen sensor clip to see if it can be used.
2. Product compatibility issue.
Solution: The product supports capacitive screens on tablets and smartphones.
Compatible e- include for (KPW), 2 (KPW2), (Kindle7, K7), Voyage (KV), 3 (KPW3), (Kindle8, ), (KO), 2 (KO2), 4 (KPW4), 10 (Kindle10, K10), 3 (KO3) and other models.
Colour:Black
Material:plastic

Package Contents:
1 x page turner
1 x data cable

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.