Sorry, this item is temporarily out of stock.

2X for XGecu T76 USB3.0 Programmer Support EEPROMNAND NOR EMMC BGA,Minpro/TL866II/T56 Programmer Replacement IC Tester

New
Add to Basket
Description & Details

Summary

  • 1. Ultra-Strong Chip Compatibility: The T76 not only supports common EEPROM, EPROM, and FLASH chips on the market but also features robust microcontroller and programmable logic device (GAL/CPLD) support, with the capability to customize and add new chip models. Whether you're dealing with serial, parallel ROM, SPI NAND, or even EMMC/EMCP chips, the T76 handles them with ease.
  • 2. New Architecture, Double the Speed:The T76 features a high-performance 32-bit RISC-V MCU + FPGA controller, paired with a high-speed USB 3.0 Type-C interface. This configuration provides data transfer speeds up to 140MB/sec (EMMC 5.1 actual transfer rate), multiple times faster than traditional programmers! Whether you are reading or writing data, you will experienceFast Charging operation.
  • 3. Superior Performance, Stable and Reliable: The T76 employs a high-density board design and comes with a high-quality USB 3.0 aluminum gray braided cable, ensuring stable and reliable signal transmission. In addition, the T76 offers comprehensive power protection mechanisms, including over-voltage, over-current, reverse connection protection, and low-voltage warnings, allowing you to program with peace of mind, worry-free.
  • 4. One Device for Multiple Uses, Save on Costs:The T76 is equipped with a high-quality BGA adapter, featuring a 4-layer board design and 2u gold-plated pins, along with anti-interference shielding grounding and spring-loaded probe IC sockets, ensuring reliable connections and a long service life. A single BGA adapter can cover a variety of chips, saving you the cost of purchasing multiple adapters.
  • 5. Innovative Design, Convenient Operation: The T76 has 76 external IO pins, 48 of which are full-function IO pins and 28 of which are dedicated IO pins.

2X for XGecu T76 USB3.0 Programmer Support EEPROMNAND NOR EMMC BGA,Minpro/TL866II/T56 Programmer Replacement IC Tester Description

1. Ultra-Strong Chip Compatibility: The T76 not only supports common EEPROM, EPROM, and FLASH chips the market but also features robust microcontroller and programmable logic device (GAL/CPLD) support, with the capability to customize and add new chip models. Whether you're dealing with serial, parallel ROM, SPI NAND, or even EMMC/EMCP chips, the T76 handles them with ease.
2. New Architecture, Double the Speed:The T76 features a high-performance 32-bit RISC-V MCU + FPGA controller, paired with a high-speed USB 3.0 Type-C interface. This configuration provides data transfer speeds to 140MB/sec (EMMC 5.1 actual transfer rate), multiple times faster than traditional programmers! Whether you are reading or writing data, you will experienceFast Charging operation.
3. Superior Performance, Stable and Reliable: The T76 employs a high-density board design and comes with a high-quality USB 3.0 aluminum gray braided cable, ensuring stable and reliable signal transmission. In addition, the T76 offers comprehensive power protection mechanisms, including over-voltage, over-current, reverse connection protection, and low-voltage warnings, allowing you to program with peace of mind, worry-free.
4. One Device for Multiple Uses, Save Costs:The T76 is equipped with a high-quality BGA adapter, featuring a 4-layer board design and 2u gold-plated pins, along with anti-interference shielding grounding and spring-loaded probe IC sockets, ensuring reliable connections and a long service life. A single BGA adapter can cover a variety of chips, saving you the cost of purchasing multiple adapters.
5. Innovative Design, Convenient Operation: The T76 has 76 external IO pins, 48 of which are full-function IO pins and 28 of which are dedicated IO pins.

These IO pins simultaneously support high-speed/high-voltage/high-current applications, giving you more fle

Details

OPC PXPVZHC
Codes 6033991091034 (EAN)
Product and Safety Information

Product Images

2X for XGecu T76 USB3.0 Programmer Support EEPROMNAND NOR EMMC BGA,Minpro/TL866II/T56 Programmer Replacement IC Tester 1
2X for XGecu T76 USB3.0 Programmer Support EEPROMNAND NOR EMMC BGA,Minpro/TL866II/T56 Programmer Replacement IC Tester 2
2X for XGecu T76 USB3.0 Programmer Support EEPROMNAND NOR EMMC BGA,Minpro/TL866II/T56 Programmer Replacement IC Tester

Product Data

Height12cm
Width12cm
Length17cm
Weight0.461kg
ColourBlack & Brown
MaterialPlastic

Sorry, this item is temporarily out of stock.

2X for XGecu T76 USB3.0 Programmer Support EEPROMNAND NOR EMMC BGA,Minpro/TL866II/T56 Programmer Replacement IC Tester

New
Safety and Product Resources

Safety images and documents

Sorry, this information isn't available at the moment. We're working with the seller to update this section as soon as possible, so please check back later.

Manufacturer information

Sorry, this information isn't available at the moment. We're working with the seller to update this section as soon as possible, so please check back later.

Responsible person in the EU

Sorry, this information isn't available at the moment. We're working with the seller to update this section as soon as possible, so please check back later.

Wait! You've left
something behind...

You'll only get instant Cashback at OnBuy! Enter your email below and we'll send you a copy of your basket to save you time later.

By entering your email address, you'll automatically be added to our database, where you can enjoy personalised Cashback offers and early access to our best deals. You can opt out of our emails at any time and we'll never share your details with anyone. Check our Privacy Policy and T&Cs to find out more.

Before you go...
Remember, you'll only get instant Cashback on everything at OnBuy!

Want access to personalised offers and the highest Cashback rates? Sign up to our emails below.

You can opt out of our emails at any time and we'll never share your details with anyone. Check our Privacy Policy and T&Cs to find out more.

This page has expired.

Please refresh the page to continue shopping.

Refresh and continue