2X M9N GPS Module Built-in Buzzer Compass LED Indicator for Pix32 6C Flight Controller B

2X M9N GPS Module Built-in Buzzer Compass LED Indicator for Pix32 6C Flight Controller B Description

The M9N GPS uses a multi-constellation GNSS powered by M9N, a parallel GNSS receiver that can receive and track multiple GNSS systems.
All four major GNSS constellations (GPS, , GLONASS and BeiDou) can be received simultaneously thanks to the multi-band front-end architecture.
It also comes with an IST8310 compass, a tri-color LED indicator, a buzzer and a safety switch. There are 3 different connectors to choose from for different uses. The module has a baud rate of 115200 (previously 38400).
It has an active circuit for the ceramic patch antenna, a rechargeable backup battery for hot .
The high-gain 25 x 25 mm2 patch antenna provides excellent performance, and the omnidirectional antenna radiation pattern increases the flexibility of device installation.

GNSS Receiver:Ublox M9N
Number of Concurrent GNSS:Up to 4 GNSS,BeiDou,,GLONASS,GPS,QZSS
Frequency Band:GPS L1, E1,GLONASS L1,BeiDou B1,SBAS L1,QZSS L1
Compass:IST8310
Output Protocol:UBX(),NMEA
Accuracy:1.5m
Nav. Update Rate:Up to 25 Hz (4 concerrent GNSS)
GNSS Augmentation System:EGNOS, GAGAN, MSAS and WAAS,QZSS: L1S
Default Baud Rate:115200
Input Voltage:4.7-5.2V
Port Type:JST-GH-10P
Antenna:25 x25 x4 mm ceramic patch antenna
Power consumption:Less than 200mA @ 5V
Operating Temperature:-40-80
Cable Length:26cm (42cm cable purchase separately)
Other:Tri-color LED
Onboard Buzzer
Safety Switch
LNA MAX2659ELT+ Amplifer
Rechargeable capacitance
Low noise 3.3V regulator
Due to different batches, the printed words on the product be different, which does not affect use.
Type:B:for Pix32
Colour:Black
Material:ABS

Package Contents:
2 x GPS Module
2 x Carbon Fiber Stick
4 x Bases
2 Set x Mounting Screws

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.