35Mhz-4.4GHz N-Type Power Meter

35Mhz-4.4GHz N-Type Power Meter Description

Support a variety of high-speed dynamic acquisition, support spectrum display, can accurately measure single-frequency power;.
Built-in digital programmable attenuator (O-31.75DB), with numerical control attenuator in the case of measuring the maximum input power of 30dBm(1W), dynamic range: +30dBm to -70dBm.
power meter V10 comes with 1.3 inch TFT LCD and built-in Li battery, can run offline (spectrum).
The upper computer has two MARK cursor function, easy to measure the modulation pulse width; Automatically find the maximum value, minimum value function.
Boot process: check whether the battery switch needs to be ON position, and then the middle button of the panel.

1, measuring power range -70 ~ +30dbm (0 to -40dbm has a good linearity, input signal 0 to +30dbm, must set the internal numerical control attenuator ATT=30DB, OFFSET30DB measured after the display of the measured power value
2, measuring power resolution 0.1dBm
3, measurement frequency range 35M ~ 4.4GHz(different models frequency range is different)
4, input impedance: 50
5, dynamic range: 100dB
6, working voltage: 5VDC(through the TYPE-C line power supply)
7, charging current: 400mA
Colour: Silver
Material: Aluminum Alloy

Package Contents:
1x Power Meter

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.