4.3 Inch LCD Display for 4B/3B+/3A+/3B/2B/B+/A+ I

4.3 Inch LCD Display for 4B/3B+/3A+/3B/2B/B+/A+ I Description

4.3inch LCD Touch Display for , 800x480 resolution, IPS screen wide angle
Supports Pi 4B/3B+/3A+/3B/2B/B+/A+, CM3/3+/4(CM3/3+/4 requires extra adapter board)
Supports Raspbian, 5-points touch, driver free
Supports / / WIN10 IoT, single point touch, driver free
Supports Retropie, driver free

1. Capacitive touch panel, support up to 5-point touch
2. interface, refresh rate up to 60Hz
3. Tempered glass capacitive touch panel, hardness up to 6H
4. When used with , supports OS / / and Retropie, driver free.
5. Supports software control of backlight brightness
Hardware connection
Connect the interface of 4.3inch LCD to the interface of .
For easy use, you can fix the on the backside of the 4.3inch LCD by screws
Software setting
Supports OS / / and Retropie systems for .
1) Download image from the website.
2) Download the compressed file to the PC, and unzip it to get the . file.
3) Connect the TF card to the PC, use SDFormatter software to format the TF card.
4) Open the Win32DiskImager software, select the system image downloaded in , and click 'Write' to write the system image.
5) After the image has finished writing, save, and quit the TF card safely.
6) Power on the and wait for a few seconds until the LCD displays normally. And the touch function can also work after the system starts.
color:Blue+black
Material:PCB

Package Contents:
1 x 4.3inch LCD
1 x FPC 15PIN 1.0 pitch 50mm (opposite sides)
1 x Screws pack

Only the above package content, other products are not included.
Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.