4S Active Balancer Board (4S)

4S Active Balancer Board (4S) Description

4S Active Balancer Board (4S) Description
This board is based on the principle of adjacent battery balancing and cannot be used as a maintenance tool. It must be used with the lithium battery protection board for connection to the battery. The voltage difference created by charging and discharging triggers the balancing board to achieve energy transfer and equalization.
Inductive energy transfer balancing board, high-current energy transfer battery voltage equalizer with 1.2A, significantly balances battery voltage and improves the overall utilization efficiency of the battery pack!
This module is used to equalize adjacent voltage differences. If the adjacent battery voltage difference reaches more than 0.1V, the internal chip performs the equalization work until the adjacent battery voltage difference is within 0.03V, at which point it no longer operates. When used with a battery pack, any adjacent voltage difference during charging and discharging triggers the balancing work, and the battery pack's voltage error is also reset to an optimal value, reducing battery maintenance costs.
Operating Voltage: 2.0 V - 4.5 V
Universal External Iron-Lithium Battery
LTO battery is!!!
Balancing Instructions
1. When the balancing light is on, balancing is enabled.
2. The balancing light is off, and the balancing circuit is in idle mode.
3. The balancing light is flashing, indicating that the voltage has dropped or the circuit is faulty.
Balancing Current
1. The adjacent voltage difference is greater than 0.1 V (the current is approximately 0.5-0.7 A).
2. The adjacent voltage difference is greater than 0.2 V (the maximum balancing current is 1.2 A).
3. The smaller the voltage difference, the smaller the balancing current.
Color: as shown
Material: PC + Metal
Package Contents:
2 x 4S Active Balancer Board
Only the above package contents, other products are not included.
Note: Light reflections and different displays may cause the color of the item in the picture to be slightly different from the original. The allowable measurement error is +/- 1-3 cm.
[OnBuy.com]