-7850A Ver 2.0 Incubator Humidity/Temperature Controller-A

-7850A Ver 2.0 Incubator Humidity/Temperature Controller-A Description

-7850A Ver 2.0 Incubator Humidity/Temperature Controller-A Description
Features: Sensor cable can be extended to 50 meters; 0-99% relative humidity control; Very high accuracy; Additional outputs: two for outputs.
Features: Heating/cooling mode option; Humidifying/dehumidifying mode option; Delay protection for temperature and humidity output; Alarm for excessively high/low temperature/humidity; Sensor failure alarm and output protection; Calibration for temperature and humidity.
Output R1: Can be activated in case of excessive heat and/or excessive humidity. Can drive an exhaust fan or an alarm indicator.
Two: One timer output is R1, which can drive an exhaust fan regularly; further timer outputs R4 and R5 can, for example, drive an incubator's egg tray; R4 and R5 can be activated via buttons to control the egg tray at any angle.
Suitable for: Incubator control; humidity control for swallows, swiftlets; Control
Power supply: 100 - 240 V AC, 50/60 Hz
Sensor: The factory-supplied cable length is 2 meters
Accuracy: Temperature: 1% / 25 degrees Celsius
Humidity: +/- 3% (with sensor -SHr05J), +/- 2% (with sensor -SHr05P)
Setting range: Temperature: 0.0 - 65.0 degrees Celsius
Humidity: 0 - 80% relative humidity (when U9 = 0 for -SHr05J), 0 - 99% relative humidity (when U9 = 1 for -SHr05P)
Display range: Temperature: -20. ~ 80.0 degrees Celsius, Humidity: 0 ~ 99% relative humidity
Outputs:
Temperature control: R3 5 A
Humidity control: R2 5 A
Multifunction: R1 3 A
Timer outputs: R4 and R5 1 A
Operating environment: -10 ~ 45 degrees Celsius, not more than 85% relative humidity, no dew
Mounting holes: W71 x H29 (mm)
Protection class: IP65 (front only)
Type: A
Color: black
Material: plastic
Size: 7.8 x 3.5 x 7.1 cm
Package contents:
1 * automatic incubator
Only the above Package contents as stated; other products are not included.
Note: Light and different displays may cause the color of the item in the picture to be slightly different from the actual color. The allowable measurement error is +/- 1-3 cm.
[OnBuy.com]