Ã32/36mm light bracket kit optical mounting headlight support black steel for motorcycle

Ã32/36mm light bracket kit optical mounting headlight support black steel for motorcycle Description

1. It can effectively remove scratches from car headlights and solve yellowing, haziness, oxidation and other problems.
2. Restore the clarity of headlights, increase visibility and safety.
3. Also suitable for use in a new headlight, helping to maintain and protect the headlights.
4. Easy to use and operate, high transparency and strong adhesion.
5. Perfect to help extend the life of the car headlight, delaying aging. Make the headlights brighter and more perfect.
Specification:
Coating Solution: 50ml coating liquid can repair 2 headlamps.
Repair Liquid: 100ml
Item Type: Headlight Restoration Kit
Operating Instructions
1. Check the headlight damage, common symptoms are: Crate, yellowing, oxidation, haze, molting, scratches and other symptoms.
2.Please stay in a clean, dry and windless environment, from grinding, cover all around the lamp with a protective film and polish the lamp cover with sandpaper until there is no gloss, use 180#, 240#, 360#, 600#, 800#, 1200#, wash and cross with water from small to large, polish in detail and do not omit the bezel, avoid returns, clean
3. Add the liquid to the atomizing cup (the unused coating liquid can be recovered, and a little more can be added appropriately), heat it with steam, power on the headlamp, unplug the power after atomization, expose to the sun, wipe off the water from the headlight, and recover the coating liquid.
Package List:
1 * Headlight Repair Kit
Note:
1. Do not store the product in the sun. Please wear a mask during operation. Pregnant women, children, and the elderly are not allowed to contact! The key to headlight repair is polishing!!
2. In the steaming process, the air intake should not be downward to avoid liquid falling on the lamp. If there is a drop accidentally, there is no need to panic. Repair other parts first, recycle the coating liquid, wait about 5 minutes, then polish and clean the part again and evaporate the coating.