AdBlue Emulator Compatible with MAN Euro 6 for NOx Sensor & DPF System

AdBlue Emulator Compatible with MAN Euro 6 for NOx Sensor & DPF System Description

Product Details ①. Compatible with MAN Euro 6 trucks, this AdBlue emulator fully disables the AdBlue system, allowing removal of various related components such as the AdBlue pump, level sensor, and ECU for simplified vehicle maintenance. ②. Enables the removal of DPF sensors, NOx sensor (excluding the first one), AdBlue temperature sensor, providing flexibility in vehicle system configuration. ③. Can be switched on/off anytime, offering convenient control over the AdBlue system status as needed. ④. Easy installation: no learning required, simply install under the metal cover of the AdBlue Pump on the right side behind the cab, disconnect the AdBlue Pump plug and connect the emulator. Specification ①. Material: plastic ②. Color: As Shown ③. Compatible with: MAN Euro 6 trucks Package Contents ①. 1 x Emulator for MAN Euro 6 Warm Tips ①. When installing, remove fuses: F894 (Multisensor In AdBlue tank), F738 (30 Signal of AdBlue pump), F1084 (NOx sensor Upstream). Fuse F737 becomes the emulator's fuse. ②. Fuse F1109 is for the NOx sensor Downstream and A1191 muffler temperature sensor, which must work correctly for DPF regeneration. ③. Remove Power from NOx downstream sensor by either cutting pin 1 in the NOx sensor plug or removing pin 10 in the X3212 plug (16 pin TE plug with yellow key on the rear right side of the engine). ④. Light reflection and different displays may cause the color of the item in the picture to differ slightly from the real thing. The measurement allowed error is 1-3cm.