Amplifier board with optical audio, Bluetooth, AMP, USB, FM radio, EU plug

Amplifier board with optical audio, Bluetooth, AMP, USB, FM radio, EU plug Description

Amplifier board with optical audio, Bluetooth, AMP, USB, FM radio, EU plug. Description: 1. Bluetooth function: After switching on, the amplifier board will display the Bluetooth mode. To activate it, go to your phone's general settings - Bluetooth - and enable the HT-1688AT signal. After a successful connection, you can use Bluetooth! 2. Memory card/USB stick: If you have a memory card, the USB stick will be automatically recognized when inserted into the amplifier board! 3. Audio Mode: When using an audio cable to connect to the amplifier board, turn on the computer and press the mode button on the remote control to switch to audio mode (the mode it will recognize as the audio input source is the audio cable). Plug in the audio cable and you can use it. Supports reading MP3 songs from TF card and USB drive. Supports adjusting treble, bass, and master volume. Dual microphone input, adjustable reverb, built-in Bluetooth, and FM radio. Voltage: 220V DC: 12-24V Note: The amplifier board is powered on when switched on. This green circuit board cannot be touched. It is recommended to connect the speaker cable before installation, install it on the speaker box, and then turn on the power. Plug type: EU plug, suitable for Indonesia, Germany, France, Spain, Italy, etc. Panel: 13.8 x 8.5 cm Green function board: 10 x 5.2 cm Material: Iron Color: As shown Package contents: 1 x Speaker cable 1 x Remote control 1 x 12V DC cable 1 x 220V European power cable Only the above package contents, other products are not included. Note: Light reflections and different displays may cause the color of the item in the picture to be slightly different from the actual color. The permissible measurement error is +/- 1-3 cm.
[OnBuy.com]