Bluetooth speaker with white noise, sound system for falling asleep

Bluetooth speaker with white noise, sound system for falling asleep Description

Bluetooth Speaker with White Noise, Sound System for Sleep Aid Description
Instructions: Power On/Off: Press and hold the power button for approximately 3 seconds to turn the device on or off. Establishing a Bluetooth Connection: The first time you use the device after turning it on normally, press the M button to enter Bluetooth mode. A voice prompt will announce "Bluetooth connection established." Once the connection is established, a voice prompt will announce "Connection successful." M Button
Briefly press to switch between white noise and Bluetooth playback modes. In "White Noise" mode: Press and hold the "+" button for 2 seconds: Switch to the white noise song. Press and hold the "." button for 2 seconds: Switch to the previous song with white noise. Briefly press "+" or "." to adjust the volume. Press and hold to access the auto-off timer setting. The screen will display the auto-off timer options: 30 minutes, 60 minutes, or 120 minutes. Use the "+" or "." buttons to select the desired time. After selection, the screen will return to the time display in 2-3 seconds, indicating that the timer is set. Press and hold the M button again to display "OFF," which disables the timer function. "+" button / "_" button. Briefly press the "+" button to increase the volume. Press and hold for 2 seconds to skip to the next song. Briefly press the "." button to decrease the volume. Press and hold for 2 seconds to return to the previous song. When setting the timer, you can adjust the timer duration using the "+" and "." buttons. This is in addition to the alarm setting button. Time setting: After turning on the device, the screen displays the time in 24-hour format. Press and hold this button for 2-3 seconds, and the hour digits will begin to flash. Set the hour using the "+" or "." buttons. After selecting the hour, press the button again, and the minute digits will begin to flash. Use the buttons to adjust the minutes. Press the button again to complete the time setting. Alarm setting: After turning on the device, the display shows the time in 24-hour format. Briefly press this button to enter alarm setting mode, and "12:00" will appear on the display. Briefly press the button again, and the alarm hour digits will begin to flash. Use the "+" or "." buttons to adjust the hour. After selecting the hour, press the button again, and the minute digits will begin to flash. Use the "+" or "." buttons to adjust the minutes. Press the button again, and the alarm symbol will light up to indicate that the alarm is set. 3. To turn off the alarm: Press this button twice briefly until the alarm symbol disappears and the alarm is deactivated.
Ambient Light Button
1. Press once briefly: Activates the RGB light effect.
2. Press twice briefly: Activates the 6-color light mode.
3. Press three times briefly: Activates the night light mode.
Charging
Plug in the included Type-C charging cable and any 5V phone charger to charge the device. The indicator light illuminates during charging and goes out when the device is fully charged.
Product Name: White Noise Bluetooth Device
Model: BLD06
Input: 5V/1A
Signal-to-Noise Ratio: 82 dB
Battery Capacity: 1000 mAh
Bluetooth 5.4
Product Power: 5W
Operating Voltage: 3.7V
Frequency Response: 80Hz - 16kHz. Charging port: Type C
Weight: 264 g/kg
Speaker: 405 W
Product size: 9.5 x 9.5 x 6.1 cm
Color: White
Material: ABS
Package contents:
1 * Device with white noise
1 * Data cable
Only the above package contents, other products are not included.
Note: Light reflections and different displays may cause the color of the item in the picture to be slightly different from the actual color. The allowable measurement error is +/- 1-3 cm.
[OnBuy.com]