Car Rear View Camera Trunk Handle

Car Rear View Camera Trunk Handle Description

Weatherproof, can be used in both cars and homes. Supports night vision. High definition and wide viewing angle. Easy to install, you can install the monitor using a bracket or universal bracket. Can help prevent incidents and accidents, good anti-wear. Image sensor: CCD; Effective pixels: 628 (H) x 586 (V); Horizontal resolution: 520 TV; Minimum illumination: 0.01Lux; Night vision: 5-10 meters; Lens: 2.8 mm; Diagonal viewing angle: Wide angle: 170 degrees; Horizontal angle: 140 degrees; Synchronization: Internal synchronization; Signal and noise: more than 48db; Signal system: NTSC; Electronic shutter: Automatic; Video output: RCA interface, 1.0Vp-p, 75Ohm; White balance: Automatic; Backlight compensation: Automatic; Power supply: DC 12V; Current consumption: 50-60mA, maximum 130mA with IR on; Operating temperature: -20 to +70 degrees Celsius; Storage temperature: -30 to +80 degrees Celsius, maximum relative humidity 95%; Waterproof: IP68; Suitable for: BMW 328i 2013; BMW 3er MK6 F30 F31 F34 2012-2017; BMW 4er MK6 F32 2010-2016; BMW 5er MK6 F07 F10 F11 2010-2016; BMW X4 F26 2014-2017; BMW X3 F25 MK2 2010-2017; BMW X5 F15 2013-2017; BMW 320i F30 2012; BMW E60 E61 E70 E71 E72 E82 E88 E84 E90 E91 E92 E93. Installation Tips: Remove your car's trunk handle. Mount the camera where the trunk handle was. Connect the camera's integrated trunk handle to where the original trunk handle was connected to get power. Connect the camera's power to your reversing lights - red wire to positive, black wire to negative. Connect the camera's video cable to the extension cable. Connect the extension cable to your car's monitor. You will see the image when the car is in reverse. Color: Black; Material: ABS; Package Contents: 1 * Car Rear View Camera; 1 * 6m Video Cable; 1 * 1m Power Cable. Only the above package contents, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3 cm.