Controller Substitute for DSE4520MKII Generator Controller Control Module Panel

Controller Substitute for DSE4520MKII Generator Controller Control Module Panel Description

It is an ideal replacement for DSE4520mkII, an automatic power failure control module (utility).
The controller's LCD screen can display the general alarm, electrical trip and stop alarm information, and monitor the engine speed, oil pressure, water temperature, oil level and generator frequency, voltage, current and power to provide complete engine and generator protection.
The control panel supports both EFI and non-EFI engines for , natural gas and gasoline (generator frequency detection). With a variety of flexible input, output and protection functions, suitable for different application requirements. Users can set parameters via software or edit them the front panel.

Function:
Can be configured as AMF or automatic start control module
Supports J1939-75 to ma sk CAN alarms
Generator frequency and CAN detection speed
Largest backlit graphic display of its kind
All parameters can be set the front panel or PC
Rotating phase generator detection
Three phase grid test
Supports 600V cable voltage system (L-L)
Equipment/load power monitoring (kW, kVA, kVAr, pf)
Cumulative power monitoring (kWh, kVAh, kVArh)
Overload protection
Equipment/load current detection and protection
Fuel and cranking power (customizable when connected to EFI)
4 custom outputs
3 custom analog/digital inputs
4 custom digital inputs
Custom hierarchical load output
3 tips for Engine maintenance
Engine speed protection
Engine running sensor
Engine preheating
Preset engine start-stop cycles
Engine start and stop idle control
Level 4 standard engine instrument interface
Battery voltage monitoring
Start device when battery voltage is too low
Adjust remote start input
2 protection parameters
Complete alarm, trip and shutdo