Dynamic microphone amplifier, 5V power supply, single channel boost

Dynamic microphone amplifier, 5V power supply, single channel boost Description

Dynamic Microphone Amplifier 5V Power Supply Single Channel Boost Description: This professional microphone amplifier is an active, built-in preamplifier used between the preamplifiers of passive ribbon or dynamic microphones. +28 dB Gain: The amplifier circuit is low-noise, providing a good solution to the problem of low microphone volume due to low sensitivity. A Class A amplifier circuit design is used, and the higher-quality MP5+ transistor has a lower audio output impedance and higher power handling. Easy Connection, Plug-and-Play: Simply connect the microphone amplifier to the microphone's XLR output. an.
This amplifier is only suitable for wired dynamic microphones connected to sound cards with a 3.5 mm jack plug and requires only a 5 V power supply.
Frequency range: 20 Hz - 20 kHz
Gain: 28 dB
Signal-to-noise ratio: 3.0 mA
Connection: XLR, three-pin, male/female
Power supply: 5 V
Impedance: 135 ohms
Recommended impedance load: 1 kOhm
Current consumption: 110 B
Sampling rate: 24-bit/48 kbps audio
Maximum output level: 9 µV (A)
Maximum input level: 8.3 dBV/2.6 V (0.5% at 1 kHz)
Different batches may have slight variations in screen printing, but this does not affect functionality.
Color: Black
Material: Aluminum Alloy
Package Contents:
1 x Microphone Amplifier
Only the above package contents, other products are not included.
Note: Light reflections and different displays may cause the color of the item in the picture to be slightly different from the original. The allowable measurement error is +/- 1-3 cm.
[OnBuy.com]