Egg Incubator for 7 Eggs, Temperature Adjustable 0-40C, ABS Material, Suitable for Chicken, Duck Goose Eggs

Egg Incubator for 7 Eggs, Temperature Adjustable 0-40C, ABS Material, Suitable for Chicken, Duck Goose Eggs Description

Product Details 1. 7 egg cavities for incubation, suitable for chickens, ducks, geese, turtles, quails, parrots, pigeons and other oviparous animals 2. Adjustable temperature settings to meet the hatching requirements of different species 3. Even heat distribution through temperature control system for optimal hatching environment 4. Built-in fan maintains air circulation, promoting successful hatching Specification 1. Material: ABS 2. Color: As shown 3. Size: Approx. 17.5 x 17.5 x 17.5 cm / 6.8 x 6.8 x 6.8 inches (LxWxH) 4. Power: 20 W 5. Frequency: 50 HZ / 60 HZ 6. Voltage: AC 110 V-220 V 7. Egg capacity: 7 eggs Package List 1. Incubator Warm Tips 1. This item is ONLY for 110V, not 220V. Please confirm the voltage of your area before placing an order 2. Due to lighting effects, monitor's brightness, contrast settings, etc., there may be some slight differences between the pictures and the actual item's color tone 3. Gently turn the eggs by hand at least eight times a day for the first 18 days 4. Please allow 1-2mm differs due to manual measurement 5. Turn off the power each time before opening the machine lid 6. Add water every one or two days 7. The egg for hatching must be fresh fertilized eggs 8. Connect it to AC 110V, the red light will light up and the machine will be in working mode 9. Add water when starting to use 10. Check whether the machine is working before starting to work, if not, set it to 38 according to the button press instructions 11. Turn off the power after preheating. Fill the water tank with water, place it under the egg tray and put the eggs in the egg tray, then close the machine lid and turn on the power 12. Press the "Set" button once, the blue light will light up and you can set the temperature settings. Press + or - to increase or decrease the temperature, press "Set" again to save the data and exit