For ERCF V2 Enraged Encoder Cutter ERCF Filament Cutter Kit

For ERCF V2 Enraged Encoder Cutter ERCF Filament Cutter Kit Description

This is a simple filament cutter for the awesome for ERCF so tip tuning is less important.
It's made out of a Servo and a scalpell/exacto knife blade. The cutter get's mouted to the selector chart just behind the encoder - the cutter is basically an arm that swings to the left and right.
Since the for ECAS sits now on the Arm the filament path can be opened by swining the arm to the side. Then the for ERCF can feed some filament mid air (the filament tip) and when the arm swings back to close the filament path the tip gets cut off by on the arm. The cut off tip just falls off to the ground and the filament can be loaded with a clean tip time.

Different batches may have different printing screens, but it does not affect the use
Color: As Shown
Material: Plastic+Metal

Package Contents:
1 x Consumables cutter kit

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.