For N64 RGB PCB for NTSC Consoles MOD Kit

For N64 RGB PCB for NTSC Consoles MOD Kit Description

1. RGB mod uses THS7374 amp to display clearer and smoother images.
2. Can be directly connected to RGB Monitor(by for N64 RGBS cable) or can be used with (by for N64 SCART RGB cable).

Please pay attention:
How to find RGB-outputting NTSC N64 Systems:
1. If you have a serial number that starts with "NS1" (USA), "NUJ1" (Japan) or French systems with the model number "NUS-001(FRA)", then you most likely have an N64 that's compatible. Supposedly, some early Canadian N64's also contain this chip.
2. Many older Brazilian N64's contain the same chip and can be RGB modded. Even though Brazil used PAL-M, is was still 60Hz and only compatible with for NTSC games: http://s9.zetaboards.com/Nintendo_64_Forever/topic/7405289/1/
3. If you have a serial number that starts with anything else, or is a PAL console-Not compatible with this module.
4. This modification only works with NUS-CPU-01/02/03/04 main board revisions! Also, verify that your main board has a "-NUS"/"-NUS A" chip (U4). If that's not the case - stop here! Your console is not compatible with this modding board!
Due to different product batches, the appearance , which does not affect the use.
Colour:As Shown
Material:PC+Metal

Package Contents:
1 x RGB mod pcb
4 x wires
1 x Insulation tape

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.