Guitar 3/23/35 degree fret file B

Guitar 3/23/35 degree fret file B Description

Guitar 3/23/35 Degree Fret File B Description
1. [Fret Bevel File] The fret bevel file has three angles: 3, 23, and 35 degrees. It was specifically designed for removing fret burrs and chips. To prevent damage to the fretboard from excessive force, place a layer of textured paper on the fretboard for protection before use.
2. [Instructions for Use] Select the angle and tighten the two screws. First, use the 3-degree angle for filing, fret sanding, fret filing, or tenon removal. Then, select the 23-degree angle for finishing. If you need a steeper bevel, you can use the 35-degree angle for sanding.
3. [Tools for Guitar Makers] The guitar fret file is an essential tool for guitar making. It is made of carbon steel and has high-precision serrated teeth on both sides. You can easily remove fret burrs and chips with it.
4. [Versatile Use] The fret end dressing file is designed for polishing the fret end. Works on all frets: guitars, basses, electric pianos, ukuleles, banjos, etc.
5. [Save money and effort] Repairing or replacing a guitar in a workshop is more expensive. This guitar fret file helps you smooth fret burrs, works efficiently, and saves you money. After each use, clean off any stray shavings with a brush and then wipe the file with oil or protectant to prevent rust and extend its lifespan.
Color: B: Dark wood color
Material: Wood + Metal
Package Contents:
1 * Beveling File
2 * Files
Only the above package contents, other products are not included.
Note: Light reflections and different displays may cause the color of the item in the picture to be slightly different from the actual color. The allowable measurement error is +/- 1-3 cm.
[OnBuy.com]