Hetang Yuese Digital Temperature Controller, Heating Cooling

Hetang Yuese Digital Temperature Controller, Heating Cooling Description

Simpler quality: time opening, time stopping and time switch; Just plug it in and select the heating/cooling system, then it works, no rotation, LCD with precise display. Measuring range: 50-99 degrees C. Resolution: 0.1 VS; 3. Accuracy: 1C (-20~60C). The digital temperature controller can supply all 100-250V, 16A (max), Connect to cooling and heating systems at the same time. Heating/cooling difference function can be set separately for cooling and heating for temperature control under large changes. Temperature alarm: When the temperature exceeds the temperature limit or when a sensor error occurs, the temperature change does not always need to be considered. It can also calibrate the compressor delay protection for compressor control and temperature. Wide application: This thermostat allows you to precisely control the room temperature. Widely used in greenhouses, fish tanks, carbon crystal heaters, aquaculture, incubators, room temperature control, home and other places. Intelligent temperature control This thermostat with timer can automatically control the switch of cooling and heating devices, and has the function of intelligent temperature control and intelligent timing. Temperature range: -40-120C Intelligent temperature sensor With this thermostat, you can accurately control the room temperature. Equipped with a 1.8m cable temperature sensor for real-time measurement. LCD with precise display High-definition LCD display, clear and intuitive monitoring of all data, accurate temperature control in real time. Accuracy: +/- 1%, Timing accuracy: MAX 10 minutes. F01: Cycle time setting mode Cycle time setting mode F01, depending on the start of the working cycle time (opening) / stop time (closing). F02: On-time mode F02 synchronization mode is on, currently off (delayed) on-time status. F03: Synchronization stop mode F03 timing stop, current on, delay (stop time) off, stop countdown is complete, output is off, and output is off. F04: Timer on/off mode F04 timer switching mode, current off, delay (start time) is on, and delay (start time) is off) is off when it is triggered. After the idle time countdown is completed, turn off the output and exit the operation. In time setting mode, when the start time/end time.