High-resolution LCD controller LVDS EDP LCD driver board

High-resolution LCD controller LVDS EDP LCD driver board Description

High-Resolution LCD Controller LVDS EDP LCD Driver Board Description This driver board is suitable for a standard input voltage of 12V, with a minimum input voltage of 1.2V and a power supply of up to 15V. Exceeding the specified voltage may damage the circuit board and components. Please check the input voltage carefully. The power rating is 2 x 2W. This driver board and TYPEC automatically detect and convert the input signal. The connected signal is critical. This driver board supports: EDP 30-pin supports EDP resolutions below 1920 x 1200; EDP 40PIN supports resolutions below 2560 x 1440; LVDS 40PIN supports general LCD screen resolutions of 1CH-6BIT or 8BIT and resolutions below 1366 x 768. 1.3 USB signal input/output, two extended USB ports, one is an integrated 1.25-6P connector and supports 3.3V and 5V voltage selection, can be used as a touch interface, USB input requires the use of a TYPEC connector. 2. Supports signal input for HDMI 1.4. 3. Supports a TYPEC signal input, can support endpoints such as computers and mobile phones, and only supports 5V power supply output, can reverse charge mobile phones, maximum 1A.
4. DC12V input port, inner diameter of the DC core is 2.1.
5. The earphone holder is an audio output and can be connected to an external power amplifier with normal earphone power supply.
6. Supports button plus full-function remote control, with 1.25-10P resolution.
7. Upgrade to use the port.
8. Amplifier output two channels, pitch 1.25-4P resolution
9. The LCD interface includes the three interfaces defined by EDP30PIN+EDP40PIN+LVDS40PIN. The output interface must be confirmed by a software upgrade.
Color: Blue
Material: PCB
Package Contents:
1 x LVDS EDP LCD Driver Board
Only the above package contents, other products are not included.
Note: Light reflections and different displays may cause the color of the item in the picture to differ slightly from the actual product. The allowable measurement error is +/- 1-3 cm.
[OnBuy.com]