Hydrogen Water Bottle Test Meter, 3 in 1 H2/ORP/Temp Digital Tester

Hydrogen Water Bottle Test Meter, 3 in 1 H2/ORP/Temp Digital Tester Description

ORP(Oxidation-reduction potential) digital water tester can accurately and quickly check the organic matter in water, which is extremely accurate and reliable, quick response; Hydrogen drinking water: -150mV and -400mV; Normal drinking water:+150-550mV; Freshwater Fish Tank: 230-260mV; Seawater Fish Tank: 350-450mV.
Widely used in domestic water, hydrogen-rich bottle, aquaculture, fish tank water quality, marine aquaculture, freshwater aquaculture, flower and plant cultivation, laboratory testing, ecological research and swimming pool, etc.
The probe uses high-sensitivity electrodes; The probe is removable to prevent accidental damage, and the plug-in design makes it easy to replace the probe by yourself; IP67 rating, brief Hydrogen test pen immersion. 18 month guarantee and lifetime friendly customer service.
When the meter is on in the air, the value will be change in normal; When using the test pen, please cover the protective cap in time to avoid the test electrode being exposed to dry air for a long time, which may cause slow or unstable data reading; If the electrode is dry, keep the electrode moist in distilled water; When the data is abnormal, press and hold the "MODE" button and "HOLD" button at the same time for 3 seconds to restore the factory settings.

Hydrogen drinking water: -150mV and -400mV; Normal drinking water:+150-550mV; Freshwater Fish Tank: 230-260mV; Seawater Fish Tank: 350-450mV.
How to use HomEnjoy 3 in 1 H2/ORP/TEMP Meter?
1. Remove the protective cap gently;
2. Turn the meter on by pressing the "ON/OFF" button;
3. Immerse the meter electrode in the test solution (immersion depth can not be over the immersion line);
4. Stir gently and wait until the reading stabilized;
5. If you need test temp, please press "TEMP/HOLD" button longly to get the reading;
6. After finished use, pleas clean the electrode with distilled water. and turn off the meter, and close the protective cap.
Tecnical Parameters:
H2 measurement range: 0 - 2400ppb (0.001-2.4ppm);
Resolution: 1ppb, 0.001ppm;
Accuracy: ? 2%, reliable and quick readings;
ORP Measurement Range: -1200-+1200mV;
Resolution: 5mV;
Accuracy: ?10mV;
TEMP Measurement Range: 32.18-140?F;
Resolution: 33.8?F;
Accuracy: ?32.18?F;
Factory calibrated;
Voltage: 4*1.5V
Material: ABS
colour: red

Package Contents:
1 x Hydrogen water bottle tester

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.