Hydrogen water bottle tester, H2/ORP/Temp digital tester

Hydrogen water bottle tester, H2/ORP/Temp digital tester Description

Hydrogen Water Bottle Tester, H2/ORP/Temp Digital Tester Description: The digital ORP water tester (Oxidation-Reduction Potential) can quickly and accurately test for organic substances in water. It operates precisely and reliably and reacts quickly. Hydrogen-rich drinking water: -150 mV and -400 mV; Normal drinking water: +150-550 mV; Freshwater aquarium: 230-260 mV; Saltwater aquarium: 350-450 mV.
Widely used in domestic water, hydrogen-rich bottles, aquaculture, water quality in aquariums, saltwater aquaculture, freshwater aquaculture, flower and plant cultivation, laboratory testing, ecological research, and swimming pools, etc.
The probe uses highly sensitive electrodes. The probe is detachable to prevent accidental damage, and the plug-in design facilitates self-replacement. IP67 protection rating, suitable for brief immersion of the hydrogen test probe. 18-month warranty and friendly customer service.
When the meter is switched on in air, the reading changes normally. When using the test probe, close the protective cap promptly to prevent the test electrode from being exposed to dry air for extended periods, as this can lead to slow or unstable readings. If the electrode becomes dry, keep it moist in distilled water. In case of abnormal readings, press and hold the "MODE" and "HOLD" buttons simultaneously for 3 seconds to restore factory settings. Hydrogen drinking water: -150 mV and -400 mV; Normal drinking water: +150-550 mV; Freshwater aquarium: 230-260 mV; Saltwater aquarium: 350-450 mV. How to use the H2/ORP/TEMP meter: 1. Carefully remove the protective cap. 2. 1. Switch on the measuring device by pressing the "ON/OFF" button.
3. Immerse the measuring electrode in the test solution (the immersion depth must not exceed the immersion line).
4. Stir gently and wait until the reading has stabilized.
5. If you need to test the temperature, press and hold the "TEMP/HOLD" button to obtain the reading.
6. Clean the electrode with distilled water after use. Switch off the measuring device and close the protective cap.
Technical parameters:
H2 measuring range: 0 - 2400 ppb (0.001 - 2.4 ppm);
Resolution: 1 ppb, 0.001 ppm;
Accuracy: 2%, reliable and fast readings;
ORP measuring range: -1200 - +1200 mV;
Resolution: 5 mV;
Accuracy: 10 mV;
TEMP measuring range: 0 - 60 C;
Resolution: 1 C;
Accuracy: 0 C;
Factory calibrated;
Voltage: 4 x 1.5 V
Material: ABS
Color: red
Package includes:
1 x Hydrogen Water Bottle Tester
Only the above package contents are included; other products are not included.
Note: Light reflections and different displays may cause the color of the item pictured to differ slightly from the actual product. The permissible measurement error is +/- 1-3 cm.
[OnBuy.com]