LED Controller Bluetooth Music 28-Key Remote Control, DC12V-24V

LED Controller Bluetooth Music 28-Key Remote Control, DC12V-24V Description

LED Controller Bluetooth Music 28 Key Remote Control, DC12V-24V Description
1. With the app, you can control and adjust the color and brightness of the light strip via Smart Bluetooth.
2. Built-in 100 types of jump mode, DIY mode, rainbow flowing water mode, meteor mode, curtain mode for on/off, music mode.
3. Time delay switch, number of segments adjustable.
4. Color and dynamic effect of each point can be freely adjusted; the color can be a color block gradient or a mixed gradient.
5. The visible range is up to 40 m, the signal is stable, power consumption is low, and operation is simple.
Product Category: LED Controller
Control Principle: BLUETOOTH 5.0
App Software Type: ZENGGE
Mobile Version Requirements: Android 6.0 or iOS 11 or higher
Rated Power: 144 W
Controllable Points: max. 2048 points
LED Driver Type: SPI: WS2812B, SM16703, SM16704, WS2811, UCS1903, SK6812, INK1003, UCS2904B
Control Method: Remote control via mobile app
Range: 40 m (open area)
DC Controller: Can only be used for 12-24 V LED strips not for 5V
Note:
1. Non-music mode controls 2048 pixels, music mode can only control 960 pixels
2. If the LED strip does not light up completely, this is because the original control pixel count set by the controller is 150 pixels. You must therefore set the number of pixels in the app at the beginning.
3. If the controller cannot control the light strip, the voltage may be insufficient. Please add more voltage to the light strip.
Connection method: DC
Rated voltage: DC12V-24V
Color: White & Black
Material: Plastic
Package Contents:
1 * LED Light Strip Controller
1 * Remote Control
Only the above package contents, other products are not included.
Note: Light reflections and different displays may cause the color of the item in the picture to be slightly different from the actual product. The allowable measurement error is +/- 1-3 cm.
[OnBuy.com]