LED Strobe Flashing Unit Controller Auto 12V

LED Strobe Flashing Unit Controller Auto 12V Description

lightweight product, easy to use and install
More than 10 methods blinking, compatible with many LED light
External flash mode is observed when the entire
Bassimo consumption, long service life
for car, motorcycles and other products.

Operating Voltage: 12V DC
Maximum power: 12V / 48W
Ambient temperature: -40 to + 50 Celsius
Size: 46 x 28 x 13mm
Material: ABS Black
flashing mode
eternal light
4 groups of light flash alternately
12 groups of light flash together
alternative flash
3 groups of light quickly and alternately flash
4 groups of light flash together
4 groups of light flash alternately, then flash together
all the lights flash alternately on and off
all the lights flash on and off alternately, then blink on and off together
All the lights are flashing on and off together
instructions:
Connect the terminal to the controller, not tascinare too strongly on the cable to avoid bad connection
For red and black cable (about 1.2m), connect the red with the positive electrode of power, connect the black to the negative
For white and black cable black cable (about 3m), two cables, connect the white black with the positive electrode of the lamp, connect the black to the negative
Turn the power on, press the MODE button on the controller for 2-3 seconds to turn it on, then press the MODE button to change the flash mode.
Avoid water and sunburn
With the mounting adhesive and LED indicator for the controller
This is a 2 way strobe controller

Package Contents:
1 x Controller
1 x Cable
1 x Adhesive

Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.