Motor pinion puller kit (2 pieces) - RC motor pinion puller - Universal motor pinion puller

Motor pinion puller kit (2 pieces) - RC motor pinion puller - Universal motor pinion puller Description

① Includes 5 pins for the following motor shaft diameters: 0.9 mm x 1, 1.75 mm x 2, 1.9 mm x 1, and 2.8 mm x 1. Suitable for radio-controlled helicopters, airplanes, or servo motors.
② Tool kit including 1 pinion puller and 1 motor pinion puller: Color: blue and silver
③ Place the gear lever in the rotating holder and secure the floats.
④ Select the end piece to be removed, insert the rotating lever, and tighten the screws (Note: Some ends have a platform; the screws should not be overtightened).
⑤ Secure the motor in the floats and move it to align the motor shaft with the end piece.
⑥ Turn the active lever clockwise to extract the motor pinion.
⑦ 1. Suitable for: The motor pinion puller is specially designed for radio-controlled cars, such as HSP HPI RC4WD AXIAL SCX10, etc. Fine finish: The surface of the extractor is glossy and burr-free. Compact size, attractive design, and impeccable finish.
⑨Easy to use: The universal RC motor pinion puller is easy to carry and use.
⑩Dimensions: Approximately 6 cm
⑪Type: RC Parts & Accessories
⑫Color: Blue and Silver
⑬Material: Aluminum Alloy
⑭Package Contents:
1 x Pinion Puller
1 x Motor Pinion Puller Tool Kit
⑮Only the above-mentioned package contents are included.
⑯Note: The color of the item in the photo may slightly differ from the actual color due to light reflection and your monitor settings. A margin of error of +/- 1 to 3 cm is possible.