MyoWare 2.0 Link Shield DEV-18425 EMG Sensor Expansion Board for Muscle Signal Interface Development

MyoWare 2.0 Link Shield DEV-18425 EMG Sensor Expansion Board for Muscle Signal Interface Development Description

Designed to easily connect a MyoWare 2.0 Muscle Sensor to your microcontroller.
Equipped with a 3.5mm TRS jack for linking boards with a 3.5mm TRS-to-TRS cable.
Includes snap connectors for easy stacking the MyoWare 2.0 Muscle Sensor.
Two switches for power and output mode selection (, RECT, ENV).
Built-in status LEDs for power and envelope signal; includes a jumper for reference or ground.

The MyoWare 2.0 Link Shield is equipped with snap connectors the board so you can easily stack it to the top side of the MyoWare 2.0 Muscle Sensor. You'll need the MyoWare 2.0 Shield and a development board with the R3 footprint to link each MyoWare 2.0 Muscle Sensor and Link Shield stack. Note: MyoWare and the Link Shield are not intended for use in the diagnosis of disease or other conditions, or in the cure, mitigation treatment, or prevention of disease, in a or other animals. Additionally, this Shield does not include the 3.5mm TRS Cable. This will need to be purchased separately.
Color: As Shown
Material: Plastic+Metal

Package Contents:
1*Module