Patio durable replacement gutter reversible easy install

Patio durable replacement gutter reversible easy install Description

Feature: 【2 Locking Types】 There are 2 types of door handle locks for your choice: Type A (without keys), Type B (with keys). Type A comes with 2 pcs screws. Type B also comes with 2 pcs. key, 2 pcs. screw and 1 pc. frame hole. 【Durable Material】 The sliding door handle lock is made of zinc alloy, thickened material, durable, wear-resistant, not easy to break. It has a smooth surface and good texture. 【For Sliding Doors】 The handle lock is designed for balcony sliding doors, glass sliding doors, partitions, side doors. It is suitable for doors with a thickness of 30-35mm, and the key version is suitable for doors with a thickness of up to 45mm because the lock cylinder patch is not long enough. 【Left-handed and right-handed】 The sliding door handle lock is reversible, designed for both left and right hands, so it can be opened from the left or right to meet your different needs. 【Easy to install】 Separate the handle from the mortise lock, insert the locking latch, align the inner door handle and the lock, then screw in the screws, tighten. No need to insert from the side door, easy to install Specifications: Type: A (without keys), B (with keys) Color: black, white Material: zinc alloy Outer handle size: about 175 x 32mm / 6.89 x 1.26. inch (W x H) Door Frame Lock Size: Approx. 185 x 20 x 160 mm / 7.28 x 0.79 x 6.3 inches (L x H x Hole Spacing) Inner Handle Size: Approx. 175 x 32 x 125 mm / 6.89 x 1.26 x 4.92 inches (L x W x Hole Spacing) Package Included: Type: Lock 1pc x Sliding Door Handle 2pcs x Screw or Type B: Lock 1pc x Sliding Door Handle 2pcs x Key 2pcs x Screw 1pc x Hole Note: 1. Due to the light and screen difference, the item's color may be slightly different from the pictures. 2. Please allow 0.5-2 cm differences due to manual measurement. 3. During installation, do not let the switch and accessories pull out, otherwise the accessory spring will be pulled out of the hole. 4. If the key cannot be pulled out after locking, you can rotate the rod on the lock cylinder 180 degrees and then insert it into the lock body to assemble. 5. Before installation, loosen the screws of the door frame lock to separate the panel from the base, and then fix the base with screws. 6. According to actual needs, the lock tongue can be torn off with pliers.