PCI-E to USB 3.2 adapter card, 5Gbps PCI Express (PCIe)

PCI-E to USB 3.2 adapter card, 5Gbps PCI Express (PCIe) Description

PCI-E to USB 3.2 Adapter Card, 5 Gbps PCI Express (PCIe) Description: With the popularity of USB 3.0, more and more computer cases offer a 19-pin USB 3.0 interface on the front panel, but older motherboards don't support USB 3.0 or don't have a 19-pin interface! You can now convert the PCI-E signal from the motherboard's PCI-E slot into a 19-pin USB 3.0 interface and two rear USB 3.0 ports, and then plug the 19-pin panel connector into the expansion card, giving you a super-fast USB 3.0 interface on the front panel. Specifications: Compatible with PCI Express Specification Version 2.0. Compatible with the USB 3.0 SuperSpeed specification version 1.0. Please also refer to the xHCI specification version 1.0.
Master chip: Renesas UPD720201 chipset
Applies to all PCI-E slots.
The highest transfer rate is up to 5 Gbps, which is significantly higher than the 480 Mbps of USB 2.0, up to 10 times higher. Backward compatible with USB 2.0, USB 1.1, and USB 1.0. Transfer rate: 5000/480/12/1.5 Mbps. USB output: up to 5V, 2A (high current type). Built-in SATA expansion power interface. Supports USB hot-plug function. Supports XP/2003/Vista/Win7/Win8/Win10. Hardware requirements: This product is a desktop PCI-E expansion card that requires a free PCI-E slot on the motherboard for installation and use. Also, check if the slot is blocked by the graphics card. The PCI slot cannot be installed and used. Never install the expansion card in the PCI slot.
Color: Black
Material: Plastic + Metal
Package Contents:
10 x PCI Express Card
10 x Low-Profile Bracket
Only the above package contents, other products are not included.
Note: Light reflections and different displays may cause the color of the item in the picture to be slightly different from the actual product. The allowable measurement error is +/- 1-3 cm.
[OnBuy.com]