Remote LED box controller for single-color LED strip lights DC12-24V

Remote LED box controller for single-color LED strip lights DC12-24V Description

Remote LED Box Controller for Single Color LED Strip Lights DC12-24V Description
This product uses a remote control (infrared model). It can adjust the brightness and dynamic changing mode via the remote control and set a delayed shutdown with the memory cut function. No frequent setup is required.
Suitable for all types of single color LED light strips.
Product Name: IR Remote Control Dimmer
LED Type: High Power LED
Input/Output Voltage: DC 12-24V
Operating Temperature: -20 to +60C
Power: 360W
Output Current: 30-36A
Remote Control Battery: 2 AAA batteries (not included)
Control Distance: 10m
Instructions:
1. 1. Plug the strip's connector into the controller's output socket, connecting the positive and negative terminals of both the controller and the strip. Be sure to check the strip's pin position for short circuits. If a short circuit is present, please repair it, otherwise the controller and LED strip will be damaged. 2. Turn on the power adapter. The remote control can now be operated according to the controller's requirements. 3. When installing the controller on a model with an infrared remote control, the remote control receiver should be installed in a location where it is not obstructed to prevent malfunctions. 4. Radio frequency models can be remotely controlled through obstacles. List of Functional Modes: 1. ON/OFF: Turns the light on and off. 2. SPEED/SPEED+: Dynamic speed adjustment. 3. LIGHT: Maximum brightness
4. Up/Down: Brightness adjustment
5. MODE+/MODE-: Selection of 8 dynamic modes. (Gradient, Breathing, Flash, Slow Flash, Fast Flash, Skip, Blink, Candlelight)
6. 10%-100%: Brightness ratio selection
7. Delay time selection from 5-60 seconds
Color: White + Silver
Material: Plastic + Metal
Package includes:
1 x Controller
1 x Remote control
Only the above package contents, other products are not included.
Note: Light and different displays may cause the color of the item in the picture to be slightly different from the original. The permissible measurement error is +/- 1-3 cm.
[OnBuy.com]