REX-C100 PID Temperature Controller Digital Thermostat Kit AC110V-240V 01300 LED Digital Temperature

REX-C100 PID Temperature Controller Digital Thermostat Kit AC110V-240V 01300 LED Digital Temperature Description

Blocks 96% of UV rays for a healthy life. Note: In winter, when the temperature is low, the window film is not flexible enough, so if it is installed separately, it will fall easily and the corners of the window film will be easy to lift. Before installation, it is recommended to soak the film in warm water for some time. You can easily stick the window film to the window with water. When installing the window film, make sure you remove the protective film from the back of the window film. The protective window film is very thin, so peel it off carefully. Good privacy and light transmission to make the light more comfortable. Provides privacy and does not block sunlight. This adhesive and opaque glass film is perfect for window decoration. Only shadows are visible in the darkness. Only in rooms where there are moving objects or people near the windows. Note: If you need 100% privacy, this film may not be suitable. Installation Step 1: Cleaning and Measuring - Clean the window thoroughly. Measure the width and length of the window. Step 2: Cut the Film - Cut the film to the desired length. The right size, about 2.5cm bigger than the window. Step 3: Spray the glass with water - get the window completely wet. Step 4: Peel - Carefully peel off the clear protective film behind the window film. Step 5: Apply - Hold the film against the window and press the entire top of the film with your finger to make it stick easily. Step 6: Flatten - Flatten the film. Be sure to use a squeegee to make sure there are no air bubbles inside. Dry the window completely with a cloth and slowly cut the excess film from the edges of the window.